61595
5
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
5
ENGLISH
Searching for the IR-code set
If you cannot find the brand of your device and the corresponding set-
up code in the list, you can let the remote control search for the correct
set-up code.
1 Use the
Mode
key to select the device for which you want to find the
set-up code. Make sure this device is switched on.
The
Device indicator
lights up.
2 Press and hold for 3 seconds.
The
Set-up
menu appears.
3 Press in the
Set-up
menu.
The
Search
and
Exit Setup
keys appear.
4 Press and hold the
OK
key.
The remote control starts transmitting Standby/Power off commands
for the selected device.The
Device indicator
blinks each time a new
code is sent.
5 As soon as the device switches off, release the
OK
key. Make sure no
other keys are pressed.
The IR-code set for the selected device has been activated, and the last
accessed page of the device appears on the touch screen.
6
Tr y out
the device specific keys.
If the activated IR-code set is correct, the device specific keys will
function correctly.
If there are keys that do not function properly, repeat instructions
2
to
5
to search for the set-up code again.
Learning Keys
You can let this SRU9400 remote control
learn
keys from your original
remote control, for example, when a function of the original remote control
is not covered by the touch screen keys.
1 Access the
Set-up
menu and press .
Page 1
of the last selected device appears on the
touch screen.
2 Place the SRU9400 remote control and the
original remote control within
2 inches’ or 6
centimeters’
distance from each other.
3 Press the
key
on the
SRU9400
remote control
that will learn a key from the original remote
control.
The
Learn
key remains on.
Tip You can access other keys of the selected
device with the Page 2 key, or you can select a
different device with the Mode key.
4 Press the
key
on the
original
remote control.
A high-pitched beep indicates that the SRU9400 successfully learned the
key. The
Learn
key blinks twice and the
Set-up
menu reappears.
-or-
A low-pitched beep indicates that the SRU9400 did not learn the key.The
Learn
key blinks once and the
Set-up
menu reappears.
5 Repeat steps
1
to
4
for each key that you want the SRU9400 remote
control to learn.
2 inches
6 cm
SRU9400_IFU_EU_v10.qxd 03-08-2006 10:53 Pagina 5
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips SRU9400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips SRU9400 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info