780731
3
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
tape has a layer of chromium dioxide, press tape
selector
®.
When using ferro-chrome
cassettes,
made
from
a
mixture of ferric oxide and chromium dioxide,
press
tape selector ®.
Muslcassettes are Compact
Cassettes
contain-
ing prerecorded music. Muslcassettes are
safe-
guarded against accidental erasure.
Controls
and connection
sockets
Figures
1 and 4
0
socket for stereo headphones
(D
socket for the
left
channel microphone
(D
socket for the
right
channel microphone
® tape selector - ferro
© tape selector - ferro-chrome
® tape selector - chromium
@
on/off
switch for Dolby system
® recording indicator
® eject key
@
record key
@
fast rewind/'review' key
@
start key
(g)
fast forward wind/'cue' key
@
pause key
@
stop key
@
mains
on/off
switch
@
cassette holder
@
counter
@
zero reset
button
for counter
@
on/off
switch for zero stop
@
on/off
switch for FM
pilot-tone
suppression
filter
(MPX) and radio interference
filter
(RIF)
@
recording level control -
right
channel
@
recording level control -
left
channel
@
recording level meter -
right
channel
@
overload/peak indicator -
both
channels
@
recording level meter -
left
channel
@
line out socket -
left
channel
(g)
line out socket -
right
channel
(g)
line in socket -
left
channel
@i
line in socket -
right
channel
@
output
level control ~
left
channel
@
output
level control -
right
channel
@
socket for stereo microphone, radio, amplifier,
gramophone combination or second recorder.
The
type plate is at the
base
of the recorder.
Note:
Do not exposé the recorder for any great
length of time to
excessive
heat
from
heating
equipment or direct sunshine.
Connecting
the recorder to the mains
Before
connecting the recorder to the mains,
ensure
that the voltage on the type plate on the
base
corresponds to your local mains supply. If it Is
not in accordance
with
your mains voltage contact
your dealer who can adjust the setting.
If the setting is correct you may proceed to connect
to the mains.
Warning: Always disconnect the mains lead before
opening the apparatus.
Note
for
users
in Great Britain
When
fitting
a mains plug to the mains lead proceed as follows;
The
wires in the mains lead are cotoured in accordance
with
the
following
code: Blue = Neutral, Brown =
Live,
As these colours
may
not correspond
with
the coiour mari<ings identifying the
terminals in your plug proceed as follows:
The
Brown wire must be connected to the terminal which is
marked
with
the letter L or coloured Red.
The
Blue wire must be connected to the terminal which is marked
with
the letter N or coloured
Black.
Note:
This
apparatus must be protecled by a 3 Amp
Fuse
if a 13
Amp plug is used or if any other type of plug is used by a 5 Amp
Fuse
either in the plug or adaptor or at the
distribution
board If in
doubt
consult a qualified electrician.
Switching
on and off
Switching on:
Press
mains switch @; the record-
ing level meters @ and @ and the cassette holder
@
now
light.
Switching off:
Press
mains switch @ again; the
lights now go out.
Note:
Never switch off the recorder while the tape
is
in
motion
without
first pressing stop key
@,
since
such
action may result in damage to the tape and
the recorder.
Inserting and removing the cassette
Inserting:
Press
eject key @; cassette holder @
will now open. With the
full
reel on the left-hand side
and the tape downwards, slide the cassette fully
info
the holder as shown in Fig. 2. After this, close
the cassette holder.
Removing:
Press
eject key @; the cassette
holder will open and the cassette can be removed.
Note:
Eject
key @ also
serves
as a stop key.
Counter
with zero stop
Make a habit of setting counter @ to '000', by
pressing
zero reset
button
@, immediately after
inserting a cassette. By
noting
the counter reading
at which each recording commences, you will later
be able to locate any of your programmes rapidly by
fast
winding or rewinding to the same reading.
Note:
The counter does not directly indicate the
playing time of the cassette, The zero stop is
switched on when switch
(g)
is pushed in. With the
zero
stop switched on, the tape stops during fast
rewinding when the indicator reaches '000'. The
start of a recording just made can be located
automatically as follows: Set the counter @ to '000'
at the start of the recording and press the zero stop
switch @ and the rewind key (jj) at the end. The tape
will rewind and stop automatically when the start
point
is reached.
3
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips N2543 N2544 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips N2543 N2544 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 18.71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info