663513
29
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
27
English
Clock/Timer
Timer setting
The system can switch on to DISC or TUNER mode
automatically at a preset time, serving as an alarm to wake
you up.
IMPORTANT!
Before setting the timer, ensure that the clock
is set correctly.
The timer will always be switched on after it
has been set.
The volume of the timer will increase gradually
to minimum level 12 or the last tuned volume
level.
1 Hold down CLOCKTIMER for more than two
seconds to enter timer mode.
The clock timer and starts flashing.
2 Press SOURCE repeatedly (or DISC or TUNER on the
remote control) to select the sound source.
DISC XX:XX" indicates the disc mode is selected.
TUNER XX:XX indicates the Tuner mode is selected.
3 Press S or T to set the hours and minutes. To
increase the speed, hold down S or T.
4 Press CLOCKTIMER to store the timer.
The set timer "XX:XX" and the selected source are
displayed.
remains on the display.
At the preset time, the selected sound source will play.
If DISC source is selected, the timer will wake up by
playing the first track of the disc or programmed track. If
the disc tray is empty, it will switch to Tuner mode.
If Tuner source is selected, the timer will wake up by
playing the last tuned radio station.
Note:
During timer setting, if no button is pressed within 90
seconds, the system will exit timer setting mode automatically.
CLOCK/TIMER
Deactivating the timer
1 Hold down CLOCKTIMER for more than two
seconds to enter timer mode.
2 In timer mode, press Ç on the system to cancel the timer.
disappears from the display and "TIMER OFF" is
displayed.
Activating the timer to the last preset
time and source
1 Hold down CLOCKTIMER for more than two
seconds to enter timer mode.
2 Press CLOCKTIMER again to store the timer setting.
The last set timer information is displayed for a few
seconds and is shown.
Sleep timer setting
The sleep timer enables the system to switch to standby
mode automatically at a preset time.
1 Press SLEEP on the remote control repeatedly to select a
preset amount of time after which the system will shut itself
off automatically.
The selections are as follows (time in minutes):
15 30 45 60 90 120 OFF 15
"SLEEP XX" or "SLEEP OFF" is displayed. "XX" is the
time in minutes.
2 When you reach the desired length of time, stop pressing
the SLEEP button.
The sleep timer is now set. Before the system switches
to standby mode, a countdown of 10 seconds is displayed.
"SLEEP 10" "SLEEP 9".... "SLEEP 1"
"SLEEP"
To check the remaining length of time after
sleep timer is activated
Press SLEEP once.
To change the preset sleep timer
Press SLEEP again while the remaining sleep timer is
shown.
The display will show the sleep timer options.
To deactivate the sleep timer
Press SLEEP repeatedly until "SLEEP OFF" is displayed,
or press the STANDBY ON button.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips LX8000SA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips LX8000SA in de taal/talen: Engels als bijlage per email.

De handleiding is 0,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Philips LX8000SA

Philips LX8000SA Gebruiksaanwijzing - Nederlands - 31 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info