535116
7
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
, If no connection is established, the message ‘NOT LINKED’ is displayed and the parent unit
starts to beep.
What to do if no link is established
- If the parent unit is out of range, place it closer to the baby unit.
- If the baby or parent unit is too close to another DECT appliance (e.g. a cordless phone), switch
off this appliance or move the unit away from this appliance.
- If the baby unit is switched off, switch it on.
Operating range
- The operating range is 330 metres/1000 feet outdoors and up to 50 metres/150 feet indoors.
- The operating range of the baby monitor varies depending on the surroundings and factors that
cause interference. Wet and moist materials cause so much interference that the range loss is up
to 100%. For interference from dry materials, see table below
Dry materials Material thickness Loss of range
Wood, plaster, cardboard, glass
(without metal, wires or lead)
< 30cm (12in) 0-10%
Brick, plywood < 30cm (12in) 5-35%
Reinforced concrete < 30cm (12in) 30-100%
Metal grilles or bars < 1cm (0.4in) 90-100%
Metal or aluminium sheets < 1cm (0.4in) 100%
Functions and feedback on the baby unit
Nightlight
The nightlight produces a soft glow that comforts your baby.
1 Press the Q button on the baby unit to switch on the nightlight.
2 Press the Q button again to switch off the nightlight.
Lullaby function
1 Press the K button on the baby unit to play the last selected lullaby. (Fig. 2)
, The selected lullaby repeats for 15 minutes.
2 Press the
button to select another lullaby from the list. (Fig. 3)
3 To adjust the sound level of the lullaby, press the volume + or the volume – button on the
baby unit (Fig. 4).
Note: You can only set the loudspeaker volume on the baby unit when a lullaby is playing. If you set the volume
for the lullaby higher, the sound will also be louder when you use the talk function on the parent unit.
4 To stop lullaby playing, press the K button on the baby unit.
Paging the parent unit
If you have lost the parent unit, you can use the FIND button on the baby unit to locate the parent
unit. This function only works when the parent unit is switched on.
1 Press FIND on the baby unit and the parent unit produces a paging alert tone (Fig. 5).
2 To stop the paging alert tone, press FIND on the baby unit again or press any button on the
parent unit. The paging alert tone stops automatically after 2 minutes.
ENGLISH 7
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Philips-Avent-SCD560

Zoeken resetten

  • Hallo,

    Onze babyfoon viel op een dag uit. Toen we hem opnieuw wouden aanzetten, kwam er 'no register' op. De ouder-unit resetten of via de kindunit 'zoeken' biedt geen oplossing. Hoe kan onze babyfoon terug werken?
    Groeten,
    Lise Gesteld op 22-11-2021 om 10:14

    Reageer op deze vraag Misbruik melden
  • Ons apparaat linkt maar niet. Hoe kan in dit oplossen? Gesteld op 26-1-2021 om 11:50

    Reageer op deze vraag Misbruik melden
  • Hoe zet ik het geluid over de temperatuur uit?
    Wordt niet goed van dit gepiep. Een oma Gesteld op 12-9-2020 om 11:51

    Reageer op deze vraag Misbruik melden
  • Er is blijkbaar iets aan de hand met het microfoontje in de babyunit, zelf op de gevoeligste stand werkt hij niet goed.
    Ik wil de babyunit openmaken maar dat lukt niet, de twee schroefjes aan de onderzijde zijn verwijderd en nog is hij niet te openen, kan iemand mij helpen..? Gesteld op 29-10-2014 om 08:42

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips-Avent SCD560 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips-Avent SCD560 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 6,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info