The HD (High Definition) mode allows you to
enjoy clearer and sharper pictures through the DVI
inputs if you are using a HD receiver/ equipment
that can transmit high definition programming.
You must first of all connect the HD equipment (see
p.12).
& Press the AV key on the remote control to
display the
Source list.
é Use the keys oœ to select HD and then press
π to switch the TV to HD mode.
“ To r eturn to TV mode, repeat steps & and
é, but select TV instead.
Using the HD menus
Press the MENU key to access the specific
settings of the HD mode. Use the cursor to
adjust them (the settings are automatically
saved):
Picture
•
Brightness: this changes picture brilliance.
•
Colour: this changes the intensity of the
colour.
•
Contrast: this changes the difference
between the light and dark tones.
•
Sharpness: this changes the picture
definitions.
•
Colour Temp.: this changes the colour
rendering:
Cool (more blue), Normal
(balanced) or Warm (more red).
•
Store: to store the picture adjustments and
settings.
Sound
•
Equalizer: to adjust the sound tone (from
bass 120 Hz to treble 10 kHz).
•
Balance: this balances the sound on the left
and right speakers.
•
Delta Volume: this is used to compensate any
volume discrepancies between the different
programmes or EXT sockets.This setting is
available for programmes 0 to 40 and the
EXT sockets.
•
AVL (Automatic Volume Leveler): this is used
to limit increases in sound, especially on
programme change or advertising slots.
•
Dolby Virtual: to activate/deactivate the
surround sound effects.
You can also access these settings with the Q
key.
•
Store: this is used to store the sound
settings.
Features
•
Sleep: to select an automatic standby period.
•
PIP: to adjust the size and position of the PIP
screen.
•
Horizontal shift: adjust the horizontal placing
of the image;
10
Using in HD (High Definition) mode
Using PIP in PC and HD mode
While in PC or HD mode you can call up a window for TV channels.
The PIP function lets you display a superimposed image to watch the TV channels at the same time.
Attention:The PIP feature is only available if a computer or HD device is connected to the DVI input and if
your PC or HD device has a digital output (
DVI OUT to DVI IN). See p. 12.
& Press the æ key to display the PIP screen. The television image is reproduced in a small
superimposed window.
é Subsequent presses of the æ key changes the size of the window, switches to dual screen and turns
PIP off.
“ Use the -P+ keys to change the programmes of the PIP screen.
Note: No audio selection possible in HD PIP mode.
(Only available on certain versions)