145527
4
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
4
Preparation
Surround loudspeakers
There are two surround loudspeakers supplied. One is the active loudspeaker,
including the RF receiver, a power switch, the mains supply, a channel selector,
a red and black connector clip and a left/right surround loudspeaker switch.
The other loudspeaker is a passive one which has to be connected with the
active loudspeaker with the supplied speaker cable.
Set the slide channel switch 1 at the bottom of the active loudspeaker to
channel 1. (In the factory channel 1 has been chosen as the default channel.)
See also Sound Setup, p. 10.
Connect the active to the passive loudspeaker with the supplied speaker
cable 2.
Push the connector clip down, insert one end of the colour coded wire into
the opening of one connector clip and push it up again. Insert the other end
of the same colour coded wire in the same colour connector clip of the
other loudspeaker. Do the same with the other wire in the other connector
clips. Do not insert the wires too far.
The Surround sound loudspeakers should always be located behind or to
either side of the listener. If preferred you can also hang the loudspeakers on
the wall.
The maximum distance between the TV and the surround speakers should
not exceed 15 m.
Note: people moving around close to the TV may interfere with the sound
transmission.
Set the slide switch 3 to the right if the active loudspeaker is positioned to
the right side of the listener, to the left if it is positioned to the left side of
the listener (seen from the point of view of watching the TV).
Connect the active loudspeaker to the mains with the mains cable 4.
Switch on the active loudspeaker with the POWER switch 5.
The red LED at the front of the active surround speaker shows that the
speaker is in standby.
During sound transmission the indicator turns to green and back to red after
10-15 min. after the TV has been switched off.
To switch the active speaker off, use the
POWER switch.
( Insert the mains plug of the TV in the wall socket having a mains voltage
of 220V-240V.
To prevent damaging the mains (AC) cord which could cause a fire or electric
shock, do not place the TV on the cord.
§ Switch the TV on : Press the power switch A on the front of your TV.
A green indicator on the front of the TV lights up and the screen comes on.
If the indicator is red, press the
-P+
keys on the remote control.
The green lamp blinks every time you press a key on the remote control.
When you switch on your set for the first time, the menu
LANGUAGE
automatically appears on the screen. The explanation appears in different languages
one at a time. Choose your own language and press the OK key on the remote
control.
5
1
4955.1 gb /05 18-01-2000 10:12 Page 4
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips 36pw9765 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips 36pw9765 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info