72 Audio Settings
Change Audio settings based on other equipment you con-
nected to the TV/VCR/DVD or according to your Disc
sound features. These settings only affect the Audio from
the DVD Player of the TV/VCR/DVD.
● Before you begin, press SELECT to put the
TV/VCR/DVD in DVD mode. The green DVD light will
appear on the front of the TV/VCR/DVD.
1
While play is stopped, press SETUP twice. The
QUICK SETUP screen will appear.
2
Press s or B to select CUSTOM at the top of
the menu, then press ENTER.
3
Press s or B to select AUDIO ( ) , then
press ENTER.
4
Press
oo
or
pp
to select DRC, DOLBY DIGI-
TAL, or DOWN SAMPLING, then follow step 5
accordingly.
5
●
If you selected DRC, press ENTER repeatedly to turn
Dynamic Range Control (DRC) ON or OFF. Choosing
ON compresses the range of volume by suppressing
loud sounds and raising low sounds. DRC is available
only on Discs recorded in the Dolby Digital format.
●
If you selected DOWN SAMPLING, press ENTER
repeatedly to choose ON or OFF. ON sets downsam-
pling to 48 kHz. OFF sets downsampling to 96 kHz.
DOWN SAMPLING is available only when the unit is
connected to a Stereo using the AUDIO OUT COAXI-
AL jack.
●
If you selected DOLBY DIGITAL, press ENTER
repeatedly to select ON or OFF. Select ON if you used
the AUDIO OUT COAXIAL jack to connect the
DVD/VCR to a stereo that is Dolby Digital compatible.
Details are on page 15. Otherwise, choose OFF.
6
Press SETUP to exit the menu.
• Dolby Digital sound must be
available on the DVD.
•You can adjust DOLBY DIGITAL
in the QUICK SETUP menu.With
QUICK selected, press ENTER.
Press p to select DOLBY DIGI-
TAL. Press ENTER to choose ON
or OFF. Press SETUP to remove
the menu.
• When you play a Disc that has
copyright protection, downsam-
pling will be at 48 kHz, even if
DOWN SAMPLING is OFF.
