770996
6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
1110
4) Once the filter is rinsed off, place inside the filter housing case with
the larger side facing down. The filter will only fit inside the case one
way, if it does not fit, flip it over. Attach the lid to the filter housing
case, press down until you hear it snap in place.
5) Attach the filter housing case to the pump by inserting the raised notch
inside the circular opening on top of the pump (Fig. 18). The opening
on top of the filter case should be right next to the raised post.
Fountain Reassembly
Fig. 17
2) Once the extra slack is
removed from the cord, affix
the rubber cap over the post to
seal off the bowl.
3) Rinse a new charcoal filter
thoroughly in cold water to help
remove any excess and loose
charcoal dust.
Fig. 19
Fig. 18
6) Reinsert the rubber grommet into the circular opening at the top of the
tower. Place it inside the hole and then gently work the piece into the
hole so that the top edge rests flat inside the dish. This will create a
seal between the filter housing case and the tower (Fig. 19).
7) Align the tower with the
rectangular indentation inside
the bowl and carefully lower it
until it rests flat (Fig. 20).
Fig. 20 a) Clean the pump more frequently
b) Clean with regular white vinegar
and let the vinegar soak for
several minutes down inside the
pump’s cavity
c) Use bottled water
Living in a humid environment, you may experience problems with mold or
algae, making the fountain feel slimy. Simply soak all of the plastic parts
(excluding the pump) in a diluted bleach solution for about ten minutes after
regular cleaning. We recommend using a mixture of 10% bleach and 90%
water. Pour some of the bleach solution inside the pump’s cavity as well
for additional disinfecting. Be sure to rinse all the parts very thoroughly
to remove all the chlorine. The best way to rinse out the pump’s cavity is
to hold it under a weak stream of water. Cleaning the fountain parts with a
bleach solution is also a great way to disinfect.
If hard water is an issue where you live, you may see white mineral
deposits inside the housing and inside the pump. These mineral deposits
may eventually prevent the impeller from turning properly. To avoid having
to replace the pump:
8) Place the fountain in a desired location. If placing on carpet,
tile or wood flooring, use a protective mat or other durable,
water resistant surface. This will help protect your floor from any
splashing or spills caused by your pet.
9) Fill the fountain by pouring water directly into the bowl. Leave at
least a half inch (1.27 cm) of space between the water level and the
rim of the bowl to help control spills and splashing.
10) Make sure the cord, the adaptor and your hands are completely dry
before you plug the fountain in. Connect the inline plug and make sure
no silver is showing, then plug the adaptor into an electrical outlet.
The Fountain and
Your Environment
Fountain Reassembly
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Petsafe PWW00-14440 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Petsafe PWW00-14440 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info