770980
25
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
25
petsafe.com
Troubleshooting
The receiver collar is not
beeping or correcting.
Check the battery to make sure it is installed properly.
Check that both lights are lit on the fence transmitter. If not, perform
the “System Test.”
The receiver collar is beeping,
but the pet is not responding to
the static correction.
Test the receiver collar with the test light by walking toward
the boundary wire. If the test light flashes, adjust the fit of the
receiver collar.
Trim your pets fur where the contact points touch the neck and/or
switch to the longer contact points.
The contact points must be in contact with pets skin.
Increase the static correction level.
Repeat the training steps to reinforce training.
Purchase a stronger receiver collar by contacting the
Customer Care Center.
The receiver collar has to be
held on top of the boundary
wire to activate.
Replace the battery.
Adjust the boundary width control knob clockwise to increase the
distance from the boundary wire that the receiver collar activates.
If using a double loop layout, make sure the boundary wires are
separated at least 5 ft.
If the receiver collar still has to be held on top of the boundary wire,
perform the “System Test.
The receiver collar activates
inside the house.
Turn the boundary width control knob counter clockwise to
decrease the distance from the boundary wire that the receiver
collar activates.
Make sure the boundary wire is not running within
15 ft. of the house. The signal can transmit through the
walls of your house.
Make sure the boundary wires are twisted from the boundary to
the fence transmitter.
The receiver LED indicator light
is flashing every 4 to 5 seconds
and I have just installed a
new battery.
To reset the low battery indicator, remove the battery from the
receiver collar. Discharge all power by holding the correction
level button down until the LED is no longer illuminated. Reinstall
the battery.
I have an inconsistent signal. Make sure the fence transmitter is at least 3 ft. from large metal
objects or appliances.
Make sure all boundary wire turns are gradual.
Make sure the boundary wire is not running parallel to or within
10 ft. of electrical wires, neighboring containment systems,
telephone wires, television or antenna cables, or satellite dishes.
If a neighboring containment system may be causing an inconsistent
signal, move the boundary wire farther away from the neighboring
containment system.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Petsafe PIG00-14582 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Petsafe PIG00-14582 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info