492082
5
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
WHPC01 Rev 03
27.04.2010 ©Velleman nv
5
Nozzle Cleaning
A clogged or partially clogged nozzle can cause a significant reduction in the quantity of water coming out of the
nozzle and may cause the unit to pulsate while spraying.
Turn off and unplug the unit.
Turn off the water supply. Relieve any pressure trapped in the hose by squeezing the trigger 2-3 times
Separate the lance from the gun.
Rotate the nozzle to the narrow stream setting.
Use the included tip cleaner or a thin metal object to insert the wire into the nozzle hole and move it back and
forth until the debris is dislodged (see fig. B4).
Remove additional debris by back-flushing water through the nozzle. To do this, place end of a garden hose
(with the water running) to the end of the nozzle for 30-60 seconds.
Angle to the Target Surface
When spraying water against a surface, maximum impact is generated when the water strikes the surface “head
on.” However, this type of impact tends to cause dirt particles to imbed in the surface instead of removing them.
The optimum spraying angle is 45 degrees.
Distance to the Target Surface
Another factor that determines the impact force of the water is the distance from the spray nozzle to the target
surface. The impact force of the water is increased as the nozzle is moved closer to the surface.
Avoiding Damage to the Target Surface
Damage to target surfaces occurs because the impact force of the water exceeds the durability of the surface.
That impact force is determined by the fan pattern and the distance and angle to the target surface. Never use a
narrow high-impact stream or a turbo nozzle (not incl.) on a surface that is susceptible to damage. Avoid
spraying windows with a narrow high impact stream or turbo nozzle (not incl.) as this may cause breakage.
Follow this procedure to avoid damage to target surfaces:
Before triggering the gun, adjust the nozzle to a wide fan pattern
Respect a min. distance of 1.5m to the target surface and use a spray angle of ± 45°
Vary the pattern spray angle and the distance to the target surface slightly until optimum cleaning efficiency is
achieved without damaging the surface
Turbo nozzle (not incl.)
A turbo nozzle, sometimes referred to as a rotary nozzle, is a very effective tool that can significantly reduce
cleaning time. The turbo nozzle combines the power of a narrow high-impact stream with the efficiency of a 25°
fan pattern. This swirls the narrow high-impact stream into a cone shape that cleans a larger area.
CAUTION:
Since a turbo nozzle uses a narrow high-impact stream, you should only use it target surfaces that cannot be
damaged by this type of spray. Also, the turbo nozzle is NOT adjustable and cannot be used to apply detergent.
Detergents
The use of detergents can dramatically reduce cleaning time and assist in the removal of difficult stains. Some
detergents have been customised for pressure cleaner use on specific cleaning tasks. These detergents are
approximately as thick as water. The use of thicker detergents, such as dish soap, will clog the chemical injection
system and prevent the application of the detergent. The cleaning power of detergents comes from applying
them to a surface and giving the chemicals time to break down the dirt and grime. Detergents work best when
applied at low pressure. The combination of chemical action and high-pressure rinsing is very effective. On
vertical surfaces you should start applying the detergent at the bottom and work your way up. This will prevent
the detergent from running down and causing streaks. High-pressure rinsing should be handles the same way. In
case of particularly tough stains it may be necessary to use a brush in combination with detergents and high-
pressure rinsing.
6. Operation
Follow the procedure below for maximum efficiency in the shortest amount of time. Remember to use the
techniques outlined underPreparations”.
Surface Preparation
Take the necessary precautions before you start: leave your car, garden furniture, etc. at a safe distance. Make
sure all windows and doors are closed tight. In addition, protect all plants and trees near the target area from
contact with the detergent.
Initial high-pressure Rinse
The next step is to spray the target surface with water to clear off any dirt or grime that may have collected
there. This will allow your detergent to attack the dirt that has worked its way into the cleaning surface. Before
triggering the gun, adjust the nozzle to a wide fan pattern and slowly adjust to the desired spray pattern. This
will help you avoid applying too much concentrated spray to the surface, which could cause damage.
Detergent Application (see fig. B6)
NOTE: Use only detergents formulated for pressure washes. Test the detergent in an inconspicuous area before
use.
Respect the detergent manufacturer’s label directions to determine the correct detergent-to-water mixing ratio (it
will be ± 1 to 19 or 5.5%).
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Perel WHPC01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Perel WHPC01 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info