492085
3
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
4605-B PEREL
3
1. The single-phase motor is isolated according to class E specifications. The motor frame is made of aluminium or
cast-iron
2. The spark guards are mounted on the steel wheel guards and together they keep sparks from flying everywhere.
3. Grinding wheels
4. Switch
5. The wire has two conductors + ground
6. Capacitor
7. Water trough
8. Gearbox
5. Assembly Instructions
Remove grinder and other parts from box.
Stand grinder on firm, level surface.
Fit eye shield assembly to dry wheel guard using bolt, flat washer and
spring washer.
Fit tool rest to dry wheel guard using flathead bolt, washer and plastic
thumb nut.
6. Operating Instructions
Secure the grinder to a stable and level surface. Positioning the grinder towards the front of the bench will facilitate
the handling of long objects. If possible, leave sufficient room to the left of the device for easy access to the wet
wheel. An alternative method consists in securing the grinder to a sheet of plywood which can then be clamped to a
bench or table to present the grinder in the most convenient position.
Before using the dry wheel make sure that the spark guard is positioned as close to the surface of the wheel as
possible. It's also a good idea to wear safety goggles when operating the grinding machine.
The dry wheel can be used for grinding profiles or bevels on virtually any cutting tool: plane irons, chisels, gouges,
turning tools, drill bits, etc. The aluminium oxide will cut cleanly and without undue heating of the tip of the tool. Take
care, however, not to grind a tool too hard or too long in order to avoid overheating. The final sharpening of the edge
should be carried out on the wet wheel.
Fill the trough with clean water to just below the edge before using the wet wheel. The wet wheel cuts more slowly
than the dry wheel, but the lower speed and the water-cooled operation produce a sharp edge with no risk of burning.
Tools can either be sharpened free-hand or, in the case of those with a long cutting face such as knives, they can be
placed on the notches on the edges of the trough in order to maintain a constant grinding angle.
Note: The EC Declaration of Conformity is attached.
The information in this manual is subject to change without prior notice.
4605-B - TOURET A MEULER MIXTE 200W
1. Introduction et caractéristiques
Aux résidents de l'Union Européenne
Des informations environnementales importantes concernant ce produit
Ce symbole sur l'appareil ou l'emballage indique que, si l'appareil est jeté après sa vie, il peut nuire à
l'environnement.
Ne jetez pas cet appareil (et des piles éventuelles) parmi les déchets ménagers; il doit arriver chez une firme
spécialisée pour recyclage.
Vous êtes tenu à porter cet appareil à votre revendeur ou un point de recyclage local.
Respectez la législation environnementale locale.
Si vous avez des questions, contactez les autorités locales pour élimination.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Perel 4605 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Perel 4605 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info