595411
30
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
27
PDMS A1
GB
Initial operation
NOTE
The grinder may only be operated on
cleaned, oil-atomised compressed air and
may not exceed the maximum operating
pressure of 6.3 bar at the appliance. The
compressor must be fi tted with a pressure
reducer to regulate the working pressure.
Wind the Tefl on tape supplied around all
threaded connectors.
Connect the appliance to a suitable compressed
air source.
First screw the 1/4“ threaded nipple onto
the mini compressed air oiler 1/4“ threaded
connector .
Then fi ll the mini compressed air oiler with
1-2 drops of special compressed air oil. To
do this, undo the crosshead screw at the mini
compressed air oiler
oil fi ller opening
and allow a few drops of oil to enter the oil
ller opening with the help of the oil bottle
included in delivery.
NOTE
A mist oiler continuously and optimally lubri-
cates the grinder as a preparation stage
after the pressure reducer. A mist oiler adds
ne drops of oil to air fl owing through the
appliance and therefore guarantees regular
lubrication.
Now screw the 1/4“ threaded nipple onto
the mini compressed air oiler 1/4“ female
threaded connector .
Now press the quick connector on the compressed
air hose (not included in delivery) onto the Com-
pressed air connector plug . The connection
locks automatically.
Now connect the other end of the compressed
air hose to the (fi lter) pressure reducer on the
compressor.
Tool-changing
Always disconnect the grinder from the compressed
air supply before changing tools.
Only ever use tools which are ready for use.
Furthermore, you must ensure that the minimum
clamping length of the shaft in the chuck is not
fallen below.
Using the spanners included in the accessories,
hold the spindle and chuck rmly and open
or close the chuck in the direction of the
arrows (see Fig. 3).
Fig. 3
Now insert one of the 10 diff erent whetstones .
NOTE
Please note the danger caused by mismatching
the diameter of the grinding tool shaft and
the chuck. Incorrectly-fi xed grinding tools can
cause severe vibration - injury hazard!
Ensure that the grinding tool is correctly fi xed,
and carry out a trial run of 30 seconds in a
safe area at idling speed.
OPEN
CLOSE
IB_43105_PDMSA1_LB1.indb 27IB_43105_PDMSA1_LB1.indb 27 14.05.14 11:1314.05.14 11:13
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PDMS A1 - IAN 43105 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PDMS A1 - IAN 43105 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside PDMS A1 - IAN 43105

Parkside PDMS A1 - IAN 43105 Gebruiksaanwijzing - Français - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info