558706
7
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
9 GB/IE
Preparing for first use / Operation
Preparing for first use
Attaching the auxiliary handle
For reasons of safety, this device must be used
only with the auxiliary handle
8
in place and
properly attached.
It is essential that you note the following:
if the drill becomes jammed, a very large torque
can be generated („the force that the machine will
exert to rotate about its own shaft“).
j Attach the auxiliary handle
8
to the spindle
collar and fix in place by tightening the wing
screw. Attach the depth stop
10
. This will help
you to drill to the exact depth required.
Inserting a tool into the chuck
Caution! Before starting any tasks on the hammer
drill, make sure that it is switched off and the
mains plug is out of the socket.
The RÖHM quick-release drill chuck allows you to
exchange drills or other tools without using a
special key etc.
Opening the chuck and
inserting a tool
j Hold the rear shell of the quick-release chuck
9
and turn the front shell until the tool (e.g. a
roundshanked drill) can be inserted. Insert
the tool.
Tightening the chuck on
to the tool
j Hold the rear shell of the quick-release chuck
9
and turn the front shell sharply until you hear
a „click clack, clack, clack“ sound (refer to
Figure A). The chuck is now locked. To release
the lock again, just turn the front shell in the
opposite direction.
Using the tool as a driver
j You will require a suitable bit holder if you wish
to use screwdriver bits with the drill.
The screwdriver bits used must be match the
screw head. Set the switch
1
a to the drill
symbol.
Operation
Figures B - H show the various possible applications
and uses.
Examples of applications and uses. Drill bits not
included.
The mains voltage at the mains socket must match
that shown on the rating plate on the device.
Devices marked with 230 V can also be operated
at 220 V.
Switching on and off
Switch on intermittent operation mode:
j Press the On / Off switch
3
.
Switch off intermittent operation mode:
j Release the On / Off switch
3
.
Switch on constant operation mode:
j Press the On / Off switch
3
, and keep it
pressed, then press the locking button
4
.
Switch off constant operation mode:
j Press the On / Off switch
3
and release it.
Infinitely adjustable
speed setting
To produce a slow speed, just press lightly on the
On / Off switch
3
. This allows you to start up your
operations smoothly and in a controlled manner.
If you increase the pressure on the On / Off switch
3
, the speed will also increase.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside KH 3143 - PSBM 1100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside KH 3143 - PSBM 1100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside KH 3143 - PSBM 1100

Parkside KH 3143 - PSBM 1100 Gebruiksaanwijzing - Nederlands, Deutsch, Português - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info