745191
28
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
24
PSTD 800 A1
GB
Saw blade type
suitable unsuitable
Initial operation
Fitting/changing the saw blade
Always remove the plug from the power socket
before working on the appliance.
Flip up the pivoting guard
.
Turn the quick-release chuck
and hold it in
this position.
Press the required saw blade into the quick-
r
elease chuck as far as the limit stop.
Release the quick-release chuck
– it must
return to its initial position. The saw blade is
now locked.
Fitting the guide fence
The guide fence can be fi xed on the left or right
of the appliance.
Undo both the clamping screws on the insertion
openings
.
Push the guide fence
into the insertion open-
ings .
Retighten the two clamping screws.
Connecting the sawdust extraction
appliance
Push the extraction connector into the vacuum
extraction duct until it is secured.
Attach an approved dust and sawdust extractor
to the e
xtraction connector .
Fitting the sliding shoe
When working on sensitive surfaces, you can fi t
the sliding shoe on the baseplate to avoid
scratching the surface.
Mount the sliding shoe
onto the baseplate
and press it up at the back until it clicks into
place on the baseplate .
To remove the sliding shoe
, unfasten it at
the rear of the baseplate and slide it off
forwards.
Operation
Setting the cutting angle
Undo the clamping screws with the Allen
key
and pull the baseplate to the rear.
Adjust the cutting angle to 0°/15°/30°/45°
with the aid of the markings on the baseplate
.
Push the baseplate to the front so that the
locking pin engages in the toothing .
Retighten the clamping screws
with the Allen
key .
Setting the stroke rate
Use the stroke rate preselection adjusting
wheel to set the required stroke rate.
Setting the pendulum stroke
You can use the pendulum stroke switch to set
the pendulum movement of the saw blade
.
You can achieve fi ne, clean cut edges without
pendulum movement (setting “0”). Switch the
pendulum movement off when working on thin
workpieces. You can achieve an increasingly
fast workrate with activated pendulum stroke
(settings 1–3).
Switching on/off
Switching the appliance on:
Press the ON/OFF switch
.
Switching the appliance off :
Release the ON/OFF switch
.
Switching to continuous operation:
Press the ON/OFF switch
and lock it in this
position with the ON/OFF switch lock button .
IB_90967_PSTD800A1_DE_AT_NL.indb 24IB_90967_PSTD800A1_DE_AT_NL.indb 24 02.08.13 10:0202.08.13 10:02
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 90967 PSTD 800 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 90967 PSTD 800 A1 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 0,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside IAN 90967 PSTD 800 A1

Parkside IAN 90967 PSTD 800 A1 Gebruiksaanwijzing - Français, Italiano - 41 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info