749292
27
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
27 GB/IE
Safety instructions / Assembling the welding shield / Preparing to weld
burns all over the body with the
appropriate clothing and face
protection. Remember the follow-
ing steps:
- Put on protective clothing before
welding.
- Put on gloves.
- Open windows or use vent to
ensure air supply
-
Wear safety goggles and a mask.
Wear gauntlet gloves made
from suitable material (leather)
on both hands. These must be
in good condition.
Wear suitable aprons to protect
the clothing from sparks and
burns. When required based on
the working method, e.g. weld-
ing overhead, wear a protective
suit and, if necessary, a head
guard.
Protecting against
rays and burns
Mark the work area with a sign
“Danger! Do not look into
flames!“ to indicate the risk to
the eyes. If possible, shield the
work areas to protect persons
nearby. Keep unauthorised per-
sons away from the welding area.
Walls in the direct vicinity of
fixed work areas should be nei-
ther light coloured nor glossy.
Protect windows against rays
passing through or reflecting at
a minimum to head height, e.g.
with suitable paint.
Assembling the welding shield
Attach the handle 8 to the welding shield 7
as shown in Fig. B.
Install the protective glass 10 to the welding
shield 7 as shown in Fig. B.
Preparing to weld
Note: When activating the power verify the current
indicator moves and the lead screw is not jammed.
Note: If the tensioning force of the electrode
holder 5 and the earth terminal 4 subsides,
replace immediately.
Connect the electric cables.
Set the ON / OFF switch 2 to the “ON“ posi-
tion. The current indicator will light up when
operation starts.
To end operation, set the ON / OFF switch 2
to the auf “OFF“ position.
Note: The yellow indicator light 6 lighting
up indicates overheating. The electric circuit will
automatically be broken. Operation will end.
Attach the earth terminal 4 directly to the
work piece or to the pad on which the work
piece is placed.
Note: Ensure direct contact to the work piece.
Thus avoid painted surfaces and / or insulation.
Note: Always use the welding shield 7 whilst
welding. It protects the eyes from the light beam
Safety instructions
emitted by the arc, yet allows for a clear view
of the work piece.
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 310867 PESG 120 B4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 310867 PESG 120 B4 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 2,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info