569177
2
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Paradigm Electronics Inc. is under license.
The “aptX® software is copyright CSR plc or its group
companies. All rights reserved. The aptX® mark and
the aptX logo are trade marks of CSR plc or one of its
group companies and may be registered in one or
more jurisdictions.
RECYCLING AND REUSE GUIDELINES FOR EUROPE
In accordance with the European Union WEEE (Waste Electrical and Electronic Equipment)
directive eective August 13, 2005, we would like to notify you that this product may contain
regulated materials which, upon disposal, according to the WEEE directive, require special
reuse and recycling processing. For this reason Paradigm Electronics Inc. (manufacturers of
Paradigm speakers and Anthem Electronics) has arranged with our distributors in European
Union member nations to collect and recycle this product at no cost to you. To nd your local distributor
please contact the dealer from whom you purchased this product or go to our website at www.
paradigm.com/shift. Please note that the product only falls under the WEEE directive. When disposing of
packing and other shipping material we encourage you to recycle through the normal channels.
FCC ID: WUO-WBT1010 and IC ID: 7985A-WBT1010. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including information that may cause
undesired operation. Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
WIRELESS TRANSMITTER COMPLIANCE INFORMATION
The term “IC” before the radio certication number only signies that Industry Canada technical
specications were met. This equipment complies with FCC and IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated with minimum distance
20cm between the radiator and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.
About Paradigm Virtual Surround?
In a typical 2.1 system all the magic of Dolby Digital or DTS
Digital surround information is lost, since there are no surround
speakers to deliver it. This precious information sits in the front
left and right speaker channels wondering what to do with itself.
Using sophisticated mathematical algorithms, Paradigm
Virtual Surround processing gathers that neglected surround
information in a central sweet spot then reows it into the
front left and right channels and sends it out into the room in
a way that creates the auditory illusion of sound enveloping
the listeners on all sides. An ‘illusion perhaps, but to our ears,
designed to hear in three dimensions, the spacious, ambient
sound that swirls around us from Movie Mode is very real.
IR Learning
Enabling IR Learning on Millenia CT 2
1. To enable IR Learning on Millenia CT 2, press and hold the
‘MUTE’ button for 5 seconds on either the remote control or
the onboard user interface. The LED on the front of the Control
Box will glow ‘BLUE’. This indicates Millenia CT 2 is now in IR
Learning Mode.
2. Using either the remote control or the onboard user interface
press the command you would like Millenia CT 2 to learn.
For example: If you want the Millenia CT 2’s remote to learn the
VOLUME +’ command, press VOLUME +’. The LED on the front of
the Control Box will ash ‘BLUE’ slowly.
3. Press the corresponding button on the 2nd remote control to
learn the command.
4. The LED on the front of the Millenia CT 2’s Control Box will ash
‘BLUE’ 5 times in quick succession to conrm the command
was received.
5. Wait a few seconds, then again press the button on the 2nd
remote control to conrm the desired command.
6. The LED on the front of the Millenia CT 2’s Control Box will
again ash ‘BLUE’ 5 times in quick succession to conrm the
command was received.
7. If the command was learned correctly, the LED on the front of
the Millenia CT 2’s Control Box will now glow a bright ‘BLUE’.
Repeat steps 2 through 6 to learn additional commands.
To end IR Learning
If no other command is pressed, the Millenia CT 2 will exit IR
Learning Mode in 20 seconds.
What do if the LED ashes ‘RED’
If the LED on the front of the Millenia CT 2’s Control Box ashes
red, the command was not received correctly. Please try again. If
the LED on the Control Box ashes ‘RED’ after a second attempt,
the Millenia CT 2 may not be able to learn your remote control.
To end IR Learning
If no other command is pressed, the Millenia CT 2 will
automatically exit IR Learning Mode in 20 seconds.
What to do if the LED ashes ‘PURPLE’
If the LED on the front of the Millenia CT 2’s Control Box ashes
‘PURPLE’, the command was not received correctly. Please try
again. If the LED on the Control Box ashes ‘PURPLE’ after a
second attempt, the Millenia CT 2 may not be able to learn
your remote control.
IMPORTANT: The IR Learning Mode operates via standard 38Khz
IR protocol only. Not all remotes function in the same manner. If
the LED on the Control Box continues to ash ‘PURPLE’ it could
indicate an error, please try another remote control.
How to Set Up Bluetooth
via the Millenia CT 2’s Remote Control or Control Box
1. Turn Millenia CT 2 on.
2. Press the Bluetooth button.
3. On your Blue-tooth enabled device, search for Millenia CT 2’.
4. The pairing process will begin automatically and pairing will
take place once a link between the device and Millenia CT 2
is established.
5. Start music play back.
6. Enjoy
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Paradigm Millenia CT 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Paradigm Millenia CT 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Paradigm Millenia CT 2

Paradigm Millenia CT 2 Gebruiksaanwijzing - English, Français - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info