Installing remote's batteries
Batteries for the Remote
Control Transmitter
(2)
•
R6 (UM3)
Identifying ControlsAccessories/Options
Clamper (2)
•
TMME258
Mains Lead
•
K2CT3DH00018
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Snap open
Snap shut
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control unit.
Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
Remote Control
Transmitter
•
N2QAKB000059
Operating Instructions
Pan European Guarantee Card
1 Year Guarantee Registration
CRM
(Customer Relationship Management)
Attaching the cable clampers
•
Do not bundle the RF cable and mains lead together (could cause
distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option’s assembly
manual to fix cables.
Function
select
Increases or decreases the programme position by one. When
a function is already displayed, press to increase or decrease
the selected function. When in Standby mode, switches TV On.
MAINS Power
On / Off switch
Lift door to open
C.A.T.S. (Contrast Automatic Tracking System) sensor
(senses brightness to adjust picture quality in "Auto" viewing mode) (p. 23)
DVB LEDPower LED
Remote control signal receiver
STR (Normalisation store)
(Stores tuning and other
function settings)
TV/AV switch
•
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass / Treble /
Balance / Manual tuning (analogue mode) (p. 32)
Normalises (p. 22)
(Resets all settings to their default levels)
Cursor buttons to make selections and
adjustments
Standard accessories
•
Identifying Controls
•
Accessories/Options
Check that you have the accessories and items shown
Remove from the TV unit
Push both side
hooks and pull
out
•
Active for Timer Programming or
Standby for Direct TV Recording
:orange (flash)
Timer Programming On :orange
Headphones jack (p. 46)
AV4 terminals
(p. 46)
•
Red light indicates Standby
mode. When using the remote
control, indicates the TV has
received a command.
Pedestal Plasma TV stand
TY-ST50P600W
TY-S37PX600W
(TH-37PX600B)
TY-S42PX600W
(TH-42PX600B)
(TH-50PX600B)
TY-S50PX600W
(TH-50PX600B)
TY-ST42P600W
(TH-37PX600B,
TH-42PX600B)
Optional accessories
SD CARD slot (p. 38)
Ferrite core
•
J0KF00000018
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes picture aspect ratio (p. 13)
TV Guide (p. 14)
Selects programmes in sequence
Subtitles
(p. 13) (To view subtitles)
Teletext (p. 16)
OK button to confirm selections and
choices.
Press after selecting programme
positions 1 - 99 (0 - 9 in Analogue mode)
to avoid delay.
VCR / DVD operations (p. 19)
Volume
Programme Information (p. 13)
Teletext Index (p. 18)
Still Picture (p. 13)
Coloured buttons used for the
selection, navigation and operation of
various functions.
EXIT (Returns to TV screen)
Switch between viewing TV or AV input.
(p. 19)
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection
(p. 42)
MENU
Press to access the Picture, Sound and
Setup menus (p. 22 and p. 24)
Direct channel access
Use together with numeric buttons to
access analogue TV channels by entering
UHF broadcast channel number.
(p. 12)
SD menu (p. 38 and p. 40)
SD Recording (p. 40)
Switches Timer recording On/Off (p. 36)
Switches DVB (digital broadcasting) /
Analogue mode (p. 12)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 12 and p. 16)
When in Standby mode, switches TV On.
Rear of the TV
Wall-hanging
bracket
(vertical)
TY-WK42PV3W
(angle)
TY-WK42PR3W
MULTI WINDOW (p. 13)
TH-37PX600B has
horizontal direction.
