602570
17
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
FAQs, etc.
32 33
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance. For details (p. 36)
White spots or shadow
images (noise)
Check the position, direction, and
connection of the aerial.
Neither image nor
sound is produced
Is the unit in "AV mode"?
Is the mains lead plugged into the socket
outlet?
Is the TV unit turned On?
Check Picture menu (p. 17) and volume.
Check all required SCART cables and
connections are rmly in place.
Auto aspect
Auto aspect is designed to provide you
with the best aspect ratio to use to ll
your screen. For user control please see
p. 30.
Problem Actions
On screen messages
Frequently Asked Questions
Problem Actions
logo appears at the
four corners of the screen
Screen
Contrast is reduced
OtherSound HDMI
No sound is produced
Is "Sound Mute" active? (p. 7)
Is the volume set to the minimum?
Sound level is low
or sound is distorted
Sound signal reception may be deteriorated.
Set "NICAM" (p. 17) in the Sound menu to "Off".
Sound is unusual
Set the sound setting of the connected equipment to "2ch L.PCM".
Check the "HDMI input" setting in the Sound menu.
(p. 17)
If digital sound connection has a problem, select
analogue sound connection. (p. 17)
Pictures from external equipment
are unusual when the equipment
is connected via HDMI
Is the HDMI cable connected properly? (p. 28)
Turn Off the TV unit and equipment, then turn them On again.
Check an input signal from the equipment. (p. 31)
Use an equipment compliant with EIA/CEA-861/861B.
TV unit goes into
"Standby mode"
The sleep function is activated.
The TV unit enters "Standby mode" about 30 min. after broadcasting ends.
The remote control
does not work
Are the batteries installed correctly? (p. 6)
Has the TV unit been switched On?
The function to prevent after-image (p. 5) is activated.
(Not a faulty symptom)
The screen saver is activated when the following
conditions without any user operation for a few minutes:
no signal in AV mode
selected locked channel
Contrast is lowered when the following conditions without
any user operation for a few minutes:
displayed menu (except Tuning menu, Owner ID and
Shipping condition)
"Control with HDMI"
function does not work
Switch the TV unit on again with the equipment on.
Set "Control with HDMI" to "Off", then set to "On" again. (p. 26)
S-Video / black and white picture
Using TV/AV button please con rm your selection is S-Video
I.e. AV2/S-Video or AV3/S-Video (p. 14).
On Screen messages - I.e. AV1/EC1
You can simply clear these by pressing .
Press again to redisplay.
Direct TV record / Q-Link functions not recording
Please con rm SCART cable and connection. Also please
set "AV2/AV3 out" in the Setup menu (p. 19).
Permanently lit spots on
screen
Due to production process involved in this technology
this may result in some pixels which are permanently lit
or unlit. This is not a malfunction.
Chaotic image, noisy
Set "P-NR" in the Picture menu (to remove noise). (p. 17)
Check nearby electrical products
(car, motorcycle, uorescent lamp).
No image can be
displayed
Is "Colour" or "Contrast" in the Picture menu set to the
minimum? (p. 17)
Blurry or distorted image
(no sound or low volume)
Reset channels. (p. 21)
Problem Actions
On screen messages Actions / Meanings
Please wait.
On screen messages
All tuning data will be erased
Recording in progress
No recording -Check Tape or Disc
"Shipping condition" will erase all tuning data.
No recording - UNKNOWN REASON
Please check settings and connections on
HDMI devices.
Recording stopped - TV source changed
Are you sure ?
DOWNLOAD IN PROGRESS PLEASE WAIT
Unable to download, Check Equipment
Feature not available
Incorrect PIN Number
Make sure the operation is with your desire.
Q-Link channel download is in progress.
Check the Q-Link connection and setting (p. 24).
The impossible source (Component / HDMI) to be record.
The PIN number you entered is wrong.
The tape or disc may be "write protected", missing or damaged.
The equipment may already be recording.
The recording cannot be done by any reason. Check the equipment.
Disc or tape may be full.
Communication error in Control with HDMI function (p. 26).
No signal can be found in Auto setup.
A function is in progress.
The recording equipment is recording the programme signal from
its own tuner. You can turn the TV off and leave the equipment
recording in the normal way.
Direct TV recording will stop if channel or input source is changed.
WARNING
All current tuning data will be erased
No stations found
Please insert the aerial
The tape or disc is active. Stop the equipment and try again.
Auto setup will be erased all present tuning data (p. 21).
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic TH42PA60EY bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic TH42PA60EY in de taal/talen: Engels als bijlage per email.

De handleiding is 9,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info