618929
49
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
English
RQT6091
Troubleshooting
Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or
a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points,
or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit)
to locate a convenient service center, or consult your dealer for instructions.
If the unit fails to operate properly even when the remedial action suggested above has been taken:
This unit uses a microcomputer to perform a large number of operations. If it fails to operate no matter which button is pressed, disconnect the
power cord, and then wait a few moments before re-connecting it. Then set the time and re-program the timer.
Notes
If something important is going to be recorded, always test-record first to check that the recording turns out properly before proceeding
with the actual recording.
The manufacturer assumes no liability whatsoever for any damages resulting from missed opportunities or accidental erasure that occurs
while conducting recording or play operations due to malfunctioning of or trouble in the unit, or for any incidental damage.
Symptom Cause Remedial action/check Ref
COMMON
No sound. A CD-R or CD-RW with nothing
recorded on it has been inserted.
(“BLANK DISC” is displayed.)
Replace the disc with one on which
tracks have been recorded.
The time display flashes in the dis-
play window.
A power failure has occurred or the
power cord has been disconnected.
Set the clock and re-program the
timer.
41
CD PLAYER
Play fails to start The CD has been inserted upside
down.
Insert it properly with the label side
facing up.
14
Condensation has formed on the
lens.
Turn on the power and wait for a
couple of hours.
Specific parts are not played properly. The CD is scratched. Replace the CD. 14
CDR
Recording is not possible The CD-R or CD-RW was loaded in
the tray upside-down.
Load the disc with the label side up. 15
The CD-R or CD-RW is already
finalized.
Further recording on a finalized CD-
RW is only possible if the Unfinalize
function is used.
Replace with a disc that can be
recorded on.
38
The source being copied is already a
digital copy itself.
Perform analog recording of the
source.
24
There is dust or scratches on the sur-
face of the disc.
Clean the disc using a commercially
available disc cleaner. If this is not
effective, replace the disc.
23
TIMER
Timer fails to start. Present time is not correct.
The timer display fails to appear.
Set the time properly.
Set the timer properly.
41
REMOTE CONTROL
No remote control operations. The batteries in the remote control
have discharged.
Replace them with two fresh batter-
ies (AA, R6, UM-3).
12
The remote control sensor is
exposed to direct sunlight or some
other intense source of light.
Move the unit so that the sensor is
not exposed to direct sunlight, a
lighting fixture or some other intense
source of light.
12
SL-PR300EB.fm Page 49 Thursday, September 27, 2001 7:54 PM
49

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SLPR300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SLPR300 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info