CD-DA
disc
73
45
120
MP3
disc
130
75
210
Batteries
used
2 alkaline
batteries
2 supplied
rechargeable
batteries
2 supplied
rechargeable
and 2 alkaline
batteries
WMA
disc
140
80
220
HOLD
NODISC
OPEN
CHARGE
F
N
2
Display
The HOLD function is on. Cancel HOLD
(
➪
page 5).
≥You haven’t inserted a disc or it isn’t inserted
correctly.
≥You have inserted a disc this unit cannot play.
The disc lid is open.
The batteries are charging. Charging is complete when
this disappears.
The program already contains 20 tracks.
Reading WMA/MP3 files.
Audio (CD-DA)
Sampling frequency: 44.1 kHz
No. of channels: 2 (left and right, stereo)
Frequency response:
20 Hz to 20,000 Hz (i0.5 dB to j8 dB)
Headphone output level:
RMS max. 6 mWi6 mW/
16 ≠ (adjustable
)
Pickup
Light source: Semiconductor laser
Wavelength: 780 nm
WMA/MP3
Supported bit rates
(Supports variable bit rates):
WMA: 32 kbps to 320 kbps
(64 kbps is recommended)
MP3: 32 kbps to 320 kbps
(128 kbps is recommended)
Supported sampling frequency:
48 kHz/44.1 kHz/32 kHz
Maximum number of items
(total no. of albums and tracks):
999
Maximum album levels: 100
General
Power supply:
DC input (via included AC adaptor):
DC 4.5 V
AC adaptor input: AC 120 V 60 Hz
Power consumption:
Using AC adaptor (WMA/MP3/CD-DA):
2.6 W/2.6 W/2.6 W
Recharging: 5.5 W
Play time:
Using on a flat stable surface at 25 eC (77 eF),
HighMAT is off, EQ is off, Hold is on, Anti-
skip is on POS 1 (CD-DA), recommended bit
rate (WMA:64 kbps/MP3:128 kbps), and the
Digital Re-master is off (WMA/MP3). Play
times are in hours and approximate.
Recharging time: About 5 to 6 hours
≥The play time may be less depending
on the operating conditions.
≥Play time will be considerably
reduced when playing CD-RW.
Dimensions (WaHaD):
136.4 mma14.6 mma136.4 mm
(5
3
/
8
za
9
/
16
za5
3
/
8
z)
Mass: 191 g (6.7 oz.) (with batteries)
137 g (4.8 oz.) (without batteries)
Operational temperature range:
0 eC–40 eC (32 eF–104 eF)
Rechargeable temperature range:
5 eC–40 eC (41 eF–104 eF)
Note:
Specifications are subject to change
without notice.
Mass and dimensions are approximate.
Caution
Specifications
AC adaptor power consumed in
standby mode: 1.6 W
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Read these operating instructions carefully before using the unit. Follow the
safety instructions on the unit and the applicable safety instructions listed below.
Keep these operating instructions handy for future reference.
Discontinue use if you experience discomfort with the earphones or any other parts that
directly contact your skin. Continued use may cause rashes or other allergic reactions.
∫Batteries
≥
Do not peel off the covering on the batteries and do not use if the covering has been peeled off.
≥Align the poles i and j correctly when inserting the batteries.
≥Do not mix different types of batteries or old and new batteries.
≥
Remove the batteries if you do not intend to use the unit for a long time.
≥Do not throw into a fire, short-circuit, disassemble, or subject to excessive heat.
≥Do not attempt to recharge dry cell batteries.
≥When carrying batteries in a pocket or bag, ensure no metal objects such as
necklaces are placed together with them. Contact with metal may cause
short-circuiting which can cause a fire. For safety, carry the rechargeable
batteries in the battery carrying case.
∫CDs
≥Do not use irregularly shaped CDs.
≥Do not use non-specification CDs.
≥Do not use CDs printed with label printers available on the market.
≥Do not use CDs with labels and stickers that are coming off or with adhesive
exuding from under labels and stickers.
∫Listening
Do not play your headphones or earphones at a high volume. Hearing experts
advise against continuous extended play.
If you experience a ringing in your ears, reduce volume or discontinue use.
Do not use while operating a motorized vehicle. It may create a traffic hazard and
is illegal in many areas.
You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
Even if your headphones or earphones are the open-air type designed to let you hear
outside sounds, don’t turn up the volume so high that you can’t hear what’s around you.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes
of sound. So what sounds “normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
≥Start your volume control at a low setting.
≥Slowly increase the sound until you can hear it comfortably and clearly, and
without distortion.
Once you have established a comfortable sound level:
≥Leave it there.
