618440
37
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
37
RQT7502
Reference
Picture
Picture distorted.
No picture.
The picture shown on the television
is not normal.
(The sides of the picture are
cut off, the picture is stretched
horizontally, or black bands appear
at the top and bottom
of the screen.)
For Saudi Arabia, Kuwait, the Middle East
and
Southeast Asia
There is ghosting when
progressive output is on.
Picture quality is poor.
The picture on the television
disappears or stripes appear
on the screen.
Menus not displayed correctly.
Some distortion is normal during SEARCH.
Check the connection.
Make sure the television is on.
Ensure the television’s video input setting (e.g., VIDEO 1) is correct.
Go to “Video” tab in the SETUP menus, and change “TV Aspect” to suit your television.
Use the television to change the aspect to the correct one.
If your television cannot change the aspect when input is progressive, try
changing 4:3 Aspect in Display Menu.
Ensure that the unit is connected directly to the television, and is not connected
through a video cassette recorder.
Change the size with the zoom function.
Connect to the component video (480P) input terminals on a television compatible
with this unit’s copy guard system. You cannot view progressive video if your
television is not compatible.
Change “Video Output Mode” to “480I” so “PROGRESSIVE” on the display goes
out. This problem is caused by the editing method or material used on DVD-Video,
but should be corrected if you use interlace output.
Check the settings in Picture Menu.
Mobile telephone chargers can cause some disturbance.
The location and orientation of the antenna are incorrect. If you are using an
indoor antenna, change to an outdoor antenna.
The television antenna wire is too close to the unit. Separate the antenna wire of
the television from the unit.
Change the zoom ratio to “x1.00”.
Set “Subtitle Position” in Display Menu to “0”.
Set “4:3 Aspect” in Display Menu to “Normal”.
Sound
No sound.
Distorted sound.
Piercing noise comes from the
speakers.
Check the connections.
Turn the volume up.
Turn muting off.
Turn Advanced surround off if it causes distortion.
Switch off the unit, determine and correct the causes, then switch the unit on.
Causes include:
– Shorting (bare wires touching) of positive and negative speaker wires.
– Using speakers with an impedance lower than that rated for this unit.
– Straining of the speakers through excessive volume or power.
– Using the unit in a hot environment without proper ventilation.
If you have connected this unit to other equipment through the OPTICAL OUT
terminal, ensure you have selected the correct settings for “Dolby Digital”, “DTS
Digital Surround” and “MPEG
\
” in the SETUP menus’ “Audio” tab.
Unit displays
The display is dark.
DVD NO PLAY
DVD NO DISC
F61
DVD U11
ERROR
DVD HMM
MM stands for a number.
Press [SHIFT]+[DIMMER] until the display returns to the original brightness.
You inserted a disc which the unit cannot play; insert one that can.
You inserted a blank DVD-RAM disc.
You haven’t inserted a disc; insert one.
You haven’t inserted the disc correctly; insert it correctly.
Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
Disc is dirty. Wipe it clean.
Incorrect operation performed. Read the instructions and try again.
Trouble may have occurred. The number following “H” depends on the status of the unit.
Reset procedure:
Press [f] to switch the unit to the standby mode and then back to ON. Alternatively, press
[f] to switch the unit to the standby mode, disconnect the AC mains lead, and then
reconnect it.
If the service numbers fail to clear, note the service number and contact a qualified
service person.
For Australia, N.Z., Saudi Arabia, Kuwait, the Middle East and Southeast Asia
Although the unit is on standby
mode, the display lights up and
changes continuously.
Turn off the demo function.
If you set the clock, demo function will be turned off automatically.
For Australia, N.Z., Saudi Arabia, Kuwait, the Middle East and Southeast Asia
Television displays
You are trying to display incompatible contents.
Go to “Video” tab in the SETUP menus, and select “Enable” in “Progressive Out
(Component)”.
Go to “Display” tab in the SETUP menus, and select “On” for “On-Screen Messages”.
Go to “Disc” tab in the SETUP menus, and select the preferred language for “Menus”.
6
29
28
32
9
9
29
5
12, 39
6
5
32
33
31
7
32
21
21
7
20
20
35
21
21
21
\
Except for Southeast Asia
For Australia, N.Z., Saudi Arabia, Kuwait, the Middle East and Southeast Asia
Cannot display group xx, content xx.
For Saudi Arabia, Kuwait, the Middle East
and
Southeast Asia
The progressive out is set to
Disable.
No on-screen display.
The discs menu is displayed
in a different language.
RQT7502_36_37_new 3/16/04, 3:14 PM37
37

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SCPM39D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SCPM39D in de taal/talen: Engels als bijlage per email.

De handleiding is 2,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Panasonic SCPM39D

Panasonic SCPM39D Gebruiksaanwijzing - Nederlands - 104 pagina's

Panasonic SCPM39D Gebruiksaanwijzing - Deutsch - 104 pagina's

Panasonic SCPM39D Gebruiksaanwijzing - English - 40 pagina's

Panasonic SCPM39D Gebruiksaanwijzing - English - 40 pagina's

Panasonic SCPM39D Gebruiksaanwijzing - Français - 104 pagina's

Panasonic SCPM39D Gebruiksaanwijzing - Français - 40 pagina's

Panasonic SCPM39D Gebruiksaanwijzing - Italiano - 104 pagina's

Panasonic SCPM39D Gebruiksaanwijzing - Espanõl, Polski - 104 pagina's

Panasonic SCPM39D Gebruiksaanwijzing - Dansk, Svenska - 104 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info