17
RQT6361
Specifications
(IHF’78)
■ AMPLIFIER SECTION
Rated minimum sine wave RMS power output
40 Hz–20 kHz both channels driven
0.9 % total harmonic distortion 100 W per channel (6 Ω)
1 kHz continuous power output both channels driven
0.05 % total harmonic distortion 105 W per channel (6 Ω)
Total harmonic distortion
rated power at 40 Hz–20 kHz 0.9 % (6 Ω)
half power at 1 kHz 0.07 % (6 Ω)
Power output at 1kHz each channel driven
0.9 % total harmonic distortion
Front 2 x 100 W (6 Ω)
Center 100 W (6 Ω)
Surround 2 x 100 W (6 Ω)
Subwoofer (f=100 Hz) 100 W (6 Ω)
Low frequency damping factor 30 (6 Ω)
Load impedance
Front 6–8 Ω
Center 6–8 Ω
Surround 6–8 Ω
Subwoofer 6–8 Ω
Dynamic headroom 2 dB (6 Ω)
Frequency response
CD, TAPE, DVD, TV, VCR 10 Hz–70 kHz, ±3 dB
Input sensitivity
CD, TAPE, DVD, TV, VCR 27 mV (200 mV, IHF ’66)
S/N (IHF A)
CD, TAPE, DVD, TV, VCR 75 dB (85 dB, IHF ’66)
Input impedance
CD, TAPE, DVD, TV, VCR 22 kΩ
Tone controls
BASS 50 Hz, +10 to –10 dB
TREBLE 20 kHz, +10 to –10 dB
Subwoofer frequency response (–6 dB) 7–200 Hz
Digital input
Optical 2
Coaxial 1
■ FM TUNER SECTION
Frequency range 87.9–107.9 MHz
Sensitivity 11.2 dBf (2 µV, IHF ’58)
50 dB quieting sensitivity
MONO 18.3 dBf (4.5 µV, IHF ’58)
STEREO 38.3 dBf (45 µV, IHF ’58)
Total harmonic distortion
MONO 0.2 %
STEREO 0.3 %
S/N
MONO 73 dB
STEREO 67 dB
Frequency response 20 Hz–15 kHz, +1 dB, –2 dB
Alternate channel selectivity 65 dB
Capture ratio 1.5 dB
Image rejection at 98 MHz 40 dB
Spurious response rejection at 98 MHz 75 dB
AM suppression 50 dB
Stereo separation
1 kHz 40 dB
10 kHz 30 dB
Antenna terminal 75 Ω (unbalanced)
■ AM TUNER SECTION
Frequency range 530–1710 kHz
Sensitivity 20 µV, 330 µV/m
Selectivity 55 dB
IF rejection at 1000 kHz 50 dB
■ VIDEO SECTION
Output voltage at 1 V input (unbalanced) 1±0.1 Vp-p
Maximum input voltage 1.5 Vp-p
Input/output impedance 75 Ω
■ GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 450 VA, 350 W
Dimensions (W x H x D) 430 x 158 x 370 mm
(16-15/16'' x 6-7/32'' x 14-19/32'')
Mass 10.5 kg (23.1 lb.)
Power consumption in standby mode: 1 W
Step 1
Step 2
Step 3
Before use
Receiver
■ Front, center, and surround speakers (SB-AFC280)
Type 2 way 2 speaker Bass-ref.
Speaker unit
Woofer 10 cm cone type
Tweeter 6 cm cone type
Impedance 8 Ω
Input power
MUSIC 200 W
DIN 100 W
Sound pressure level 81 dB/W (1.0 m)
Crossover frequency 3.5 kHz
Frequency range 65 Hz–22 kHz (–16 dB)
95 Hz–20 kHz (–10 dB)
Dimensions (W x H x D) 120 x 208 x 163 mm
(4-3/4'' x 8-3/16'' x 6-7/16'')
Mass 1.8 kg (4.0 lb.)
■ Subwoofer (SB-W280)
Type 1 way 2 speaker Bass-ref.
Speaker unit
Woofer 14 cm cone type x 2
Impedance 8 Ω
Input power
MUSIC 200 W
DIN 100 W
Sound pressure level 80 dB/W (1.0 m)
Frequency range 39 Hz–1.9 kHz (–16 dB)
42 Hz–1.7 kHz (–10 dB)
Dimensions (W x H x D) 200 x 450 x 350 mm
(7-7/8'' x 17-23/32'' x 13-25/32'')
Mass 6.9 kg (15.2 lb.)
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Speakers
Step 4
Others
Reference
