612721
29
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
RQT7799
13
Using the play/record timer
Remote control only
You can set the timer to come on at a certain time to wake you up (play
timer) or to record a radio station or from the aux source (record timer).
The play and record timers cannot be used together.
Preparations:
Turn the unit on and set the clock (A page 12).
For the play timer, prepare the desired music source (tape/disc/
radio/aux), and set the volume.
For the record timer, check the cassette’s erasure prevention tabs
(A page 12) and insert the tape in deck 2 (A page 11). Tune to
the radio station (A page 10) or select the aux source (A page
14).
1 Press [SHIFT] + [CLOCK/TIMER] to select the timer
function.
Every time you press the button:
CLOCK
Previous dispaly
RECPLAY
rPLAY : to set the play timer
rREC : to set the record timer
(Proceed to the next step within 8 seconds)
2 ON time setting
1 Press [g, REW/3] or [f, 4/FF] to set the
time.
2 Press [SHIFT] + [CLOCK/TIMER].
OFF time setting
Repeat steps 1 and 2.
3 Press [SHIFT] + [rPLAY/REC] to display the timer
indicator.
Every time you press the button:
RECPLAY
(off)
rPLAY : to turn the play timer on
rREC : to turn the record timer on
(The indicator doesnt appear if the ON and OFF times or the
clock hasnt been set.)
4 Press [
ff
ff
f] to turn the unit off.
The unit must be off for the timers to operate.
Play timer: Play will start in the set condition at the set time
with volume increasing gradually to the set level.
Record timer: The unit comes on 30 seconds before the set
time with the volume muted.
To cancel the timer
Press [SHIFT] + [rPLAY/REC] to clear the timer indicator from the
display.
(The timer comes on at the set time everyday if the timer is on.)
To change the settings (when the unit is on)
To change the play/record times
Do steps 1, 2 and 4.
To change the source or volume
1. Press [SHIFT] + [rPLAY/REC] to clear the timer indicator from the
display.
2. Make changes to the source or volume.
3. Do steps 3 to 4.
To check the settings
Press [SHIFT] + [CLOCK/TIMER] while the unit is on to select rPLAY
or rREC.
The settings are shown in the following order:
Play timer: on time off time source volume
Record timer: on time off time source
To check the settings while the unit is off, press [SHIFT] + [CLOCK/
TIMER] twice.
Timers
If you use the unit after the timers are set
After using, check that the correct tape/disc are loaded before turning
the unit off.
Note
If you turn the unit off and on again while a timer is functioning, the
OFF time setting will not be activated.
If you selected AUX as the source, when the timer comes on, the
unit turns on and engages AUX as the source. If you want to
playback or record from a connected unit, set that units timer to the
same time. (See the connected units instruction manual.)
Using the sleep timer
Remote control only
This timer turns the unit off after a set time.
While enjoying the desired source:
Press [SLEEP] to select the time (minutes).
Every time you press the button:
SLEEP 90 SLEEP 120SLEEP 60SLEEP 30
SLEEP OFF
To cancel the sleep timer
Press [SLEEP] to select SLEEP OFF.
To confirm the remaining time
Press [SLEEP] once.
The remaining time is shown for about 5 seconds.
To change the setting
Press [SLEEP] to select the new setting.
You can use the sleep timer in combination with the play/record timer.
Make sure the unit is off before the play/record timers start time.
Note
The sleep timer will be turned off when you start recording.
Remote control only
Press [PRESET EQ] to select a setting.
Every time you press the button:
HEAVY SOFT CLEAR
EQ-OFF
(cancelled)
DISCO LIVE HALL
HEAVY (sound quality) : Adds punch to rock
SOFT (sound quality) : For background music
CLEAR (sound quality): Clarifies higher sounds
DISCO (sound field) : Produces sound with the same kind of
lengthy reverberations heard at a disco
LIVE (sound field) : Makes vocals more alive
HALL (sound field) : Adds an expansiveness to the sound to
produce the atmosphere of a great concert
hall
Note
You cannot use PRESET EQ together with H.BASS.
Enhancing the bass sound
You can enhance low-frequency sound so that heavy bass sound can
be heard clearly, even if the acoustics of your room are not optimal.
Press [H.BASS].
The button light comes on.
Press the button again to cancel.
The button light goes out.
Using the built-in sound quality/sound
field settings
Sound quality/sound field
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SCAK331 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SCAK331 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 2,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Panasonic SCAK331

Panasonic SCAK331 Gebruiksaanwijzing - Espanõl - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info