492359
54
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
54
RQT9224
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies
indicated in the chart do not solve the problem, consult your dealer for instructions.
Pages
No power. • Ensure the AC mains lead is connected. 12, 13
No sound.
Sound is distorted.
• Check that the volume is adequate.
Select either “SPEAKERS A ” or “SPEAKERS B ” if the speakers indicator is off.
• Select the correct input source.
• Cancel the “MUTING ” function.
• Check that the signals can be decoded by this unit.
• Check connections to speakers and other equipment.
• Check that the input setting suits the type of connection you have made.
• Cancel the PCM FIX.
• Recording of some DVD-Audio may not be possible to be played due to
copyright protection.
15, 26
24, 26, 27
15, 26
31
50
10 to 13, 16 to 23
39
39
Sound stops.
F61 appears on the display
for about a second, and the unit
turns off.
• Check that
(
and
)
of speaker cable is interfering each other.
• Check that speaker impedance is lower than tolerance of the unit.
• Straining of the speakers through excessive volume or power.
• This may occur if you use the unit in an extremely hot environment.
• Curtains or other objects may be blocking the exhaust hole.
Ö
Determine and correct the cause, then turn the unit on.
(The protection circuit is reset.)
(Consult your dealer if the problem persists.)
10
10, 22
F76 appears on the display
and the unit turns off.
• Turn the unit off, disconnect the AC mains lead, and consult your dealer.
F70 appears on the display. • Turn the unit off, disconnect the AC mains lead, and consult your dealer.
Display is dim. • Cancel “DIMMER”. 37
Clicking sound is heard during
play.
• Depending on the input signal when playing DVD etc., the BI-AMP
function changes automatically. A clicking sound is heard when it changes.
This does not mean a problem with the unit.
MEASURING ERROR appears
on the display.
• A speaker is too far. Check speaker locations.
• An error occurred from a cause that cannot be identi ed. Perform the auto
speaker setup again.
24, 25
When speaker distances are set
(
page 37), appears on the
display with the speaker name
such as L 3.0 – ”.
• It appears when polarity of a speaker is automatically adjusted.
You can set speakers against automatic polarity adjustment. 38
When speaker distances are set
(
page 37), OVER appears
on the display.
• It appears when the measured distance exceeds 15 meters.
Check the speaker location.
Sound is not heard from the
center, surround or subwoofer
speakers.
• Ensure the speaker settings for your speakers are correct.
• Con rm Dolby Pro Logic
, NEO:6, or SFC settings, and select an
adequate mode.
• Press [SURROUND] on when you play 2-channel stereo sources.
24, 25, 37
28 to 30
13, 29
Sound is not heard from the
surround back speaker.
• Ensure the speaker settings for your speakers are correct.
• Press [SURROUND] on.
24, 25, 37
13, 29
Dolby Pro Logic
, NEO:6, and
SFC are unavailable.
• Check if the center speaker, surround speakers, and surround back
speakers are connected properly.
• Press [SPEAKERS A] on.
• Cancel ANALOG 8CH playback.
• You cannot use the effect when the input source contains dual audio
signals in Dolby Digital or DTS formats.
10, 11
26
27
There is no DTS audio output.
There is audio output, but the
DTS decoder indicator is not lit.
• Set the DTS Digital Audio Output setting on the Blu-ray Disc/DVD player
or DVD recorder to “Bitstream”.
The radio cannot be tuned in
or there is a lot of noise and
interference.
Connect the appropriate antenna. (You may need an outdoor antenna or one with more elements.)
• Adjust the position of the FM or AM antenna.
• Reduce the treble.
• Turn off nearby televisions, video decks, DVD recorders, Blu-ray Disc/DVD
players, and satellite receivers.
• Separate the antenna from other cables, cords, and appliances.
23
23
34
There is a lot of noise when
listening to AM.
• Try changing the BEAT PROOF mode. 47
The correct AM frequency
cannot be tuned in.
• Change the frequency step to suit your area when AM is selected. 47
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SA-BX500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SA-BX500 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Panasonic SA-BX500

Panasonic SA-BX500 Gebruiksaanwijzing - Nederlands - 56 pagina's

Panasonic SA-BX500 Gebruiksaanwijzing - Deutsch - 56 pagina's

Panasonic SA-BX500 Gebruiksaanwijzing - Français - 56 pagina's

Panasonic SA-BX500 Gebruiksaanwijzing - Italiano - 56 pagina's

Panasonic SA-BX500 Gebruiksaanwijzing - Espanõl - 56 pagina's

Panasonic SA-BX500 Gebruiksaanwijzing - Polski - 56 pagina's

Panasonic SA-BX500 Gebruiksaanwijzing - Dansk - 56 pagina's

Panasonic SA-BX500 Gebruiksaanwijzing - Svenska - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info