627465
7
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Before Use
-7-
Insert the plug securely into the [REMOTE] Socket as
far as it will goes. A loose connection will spoil normal
operation.
The Remote Controller
ª
Inserting a Button-type Battery
Before using the Remote Controller, insert the supplied
button-type battery.
1
While pressing the Stopper 1, pull out the Battery
Holder.
2
Insert the button-type battery with the (i) marking
facing upward.
3
Insert the Battery Holder into the Remote Controller.
When the button-type battery is exhausted, replace it with a
new CR2025 battery. (A battery is normally expected to last
about 1 year. However, it depends on operation
frequency.)
Make sure to match the poles correctly when inserting the
battery.
WARNING
THE LITHIUM BATTERY IS A CRITICAL COMPONENT
(TYPE NUMBER CR2025 MANUFACTURED BY
PANASONIC).
IT MUST NEVER BE SUBJECTED TO EXCESSIVE HEAT
OR DISCHARGE. IT MUST THEREFORE ONLY BE
FITTED IN EQUIPMENT DESIGNED SPECIFICALLY FOR
ITS USE.
REPLACEMENT BATTERIES MUST BE OF THE SAME
TYPE AND MANUFACTURER.
THEY MUST BE FITTED IN THE SAME MANNER AND
LOCATION AS THE ORIGINAL BATTERY, WITH THE
CORRECT POLARITY CONNECTIONS OBSERVED.
DO NOT ATTEMPT TO RE-CHARGE THE OLD BATTERY
OR RE-USE IT FOR ANY OTHER PURPOSE. IT SHOULD
BE DISPOSED OF IN WASTE PRODUCTS DESTINED
FOR BURIAL RATHER THAN INCINERATION.
ª
Using the Remote Controller
1
Direct the Remote Controller to the Remote Control
Sensor
(37)
of the Movie Camera and press an
appropriate button.
Distance from the Movie Camera: Within approximately
5 metres
Angle: Within approximately 15o in the vertical and
horizontal directions from the central axis
1
15˚
15˚
15˚
15˚
(37)
The above operative ranges are for indoor use. Outdoors
or under strong light, the Movie Camera may not operate
properly even within the above ranges.
Within a 1-metre range, you can also use the Remote
Controller on the LCD Monitor side of the Movie Camera.
Selecting Remote Controller Modes
When 2 Movie Cameras are used simultaneously, they can
be operated individually by selecting different Remote
Controller Modes.
If the Remote Controller Mode of the Movie Camera and
that of the Remote Controller do not match, [REMOTE]
Indication is displayed.
Setup on the Movie Camera:
Set [REMOTE] on the [OTHER FUNCTIONS] Sub-Menu to
the desired Remote Controller Mode. (
-10-
)
Setup on the Remote Controller:
[VCR1]:
Press the [D] Button and [] Button simultaneously. 1
[VCR2]:
Press the [E] Button and [] Button simultaneously. 2
When the battery in the Remote Controller is replaced, the
mode is automatically reset to [VCR1] Mode.
Power Supply
ª
Using the AC Adaptor
1
Connect the DC Input Lead to the Movie Camera.
2
Connect the DC Input Lead to the AC Adaptor.
3
Connect the AC Mains Lead to the AC Adaptor and the
AC mains socket.
The AC Mains Leads outlet plug does not fit entirely into
the AC Adaptor socket. A gap will remain as shown 1.
Before connecting or disconnecting the power supply,
set the [OFF/ON/MODE] Switch on the Movie Camera to
[OFF] and make sure that neither [CAMERA/VCR/
CARD P.B] Lamps nor Quick Start Recording Lamp is
lit.
ª
Using the Battery
Before use, fully charge the Battery.
1
Attach the Battery to the AC Adaptor and charge it.
INDEX INDEX
SELECT
STOP
KL
STILL ADV
T
W
PAU SE
STILL ADV
61 5
;
ED
21
1
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic NVGX7B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic NVGX7B in de taal/talen: Engels als bijlage per email.

De handleiding is 5,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info