Handleiding Panasonic DMC-ZS45 (pagina 2 van 2) (Engels)

588939

Verklein

Vergroot

Pagina terug

1/2

Pagina verder

∫ [Picture Size]

A picture taken with the camera is saved as picture data of up to approximately 16 million pixels.

The smaller the number of pixels is, the greater the number of recordable pictures will be.

• Quality [A]

∫ [Quality]

Set the compression rate at which the pictures are to be stored.

∫ [Sensitivity]

This allows the Sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables

pictures to be taken even in dark places without the resulting pictures coming out dark.

∫ [Date Stamp]

You can take a picture with date and time of recording.

This unit can record motion pictures in MP4 format.

• Still pictures can be taken during motion picture recording by pressing the shutter button.

(Simultaneous recording)

¢ Simultaneous recording is not possible in the following cases:

– When [Rec Quality] is set to [VGA]

– [Miniature Effect] (Creative Control Mode)

∫ About the recording quality setting

The recording quality for motion pictures can be changed in [Rec Quality] of the

[Motion Picture] menu.

• When recording to the built-in memory, [Rec Quality] is fixed to [VGA].

• The maximum continuous recordable time of a motion picture is 29 minutes and 59 seconds,

which is equivalent to a file size of approximately 4 GB.

You can check the recordable time on the screen. (With [FHD], the file size becomes larger,

causing the recordable time to become shorter than 29 minutes and 59 seconds)

∫ About zooming while recording motion pictures

•

The Extended Optical Zoom and Intelligent Zoom cannot be used during the motion picture

recording.

• If you use Extended Optical Zoom or Intelligent Zoom, the angle of view may change

drastically when you start or finish recording a motion picture.

Menus convenient for taking pictures

Save location 16 M (4:3) 3 M (4:3) 0.3 M (4:3)

Built-in Memory (Approx. 78 MB) 14 50 155

Card (8 GB) 1300 5700 15400

Settings Description of settings

[A] ([Fine]) When giving priority to the picture quality

[›] ([Standard])

When using the standard picture quality and increasing the number

of pictures to be recorded without changing the number of pixels

[100] [3200]

Recording location

(recommended)

When it is light (outdoors) When it is dark

Shutter speed Slow Fast

Noise Less Increased

Jitter of the subject Increased Less

Settings Description of settings

[W/O TIME] Stamp the year, month, and day.

[WITH TIME] Stamp the year, month, day, hour, and minutes.

[OFF] —

Recording Motion Pictures

Mode dial

• You can record motion pictures fitting each

Recording Mode.

(Motion pictures cannot be recorded in

Panorama Shot Mode.)

Motion picture button

• The recording state indicator (red) will flash

while recording motion pictures.

• Stop the recording by pressing the motion

picture button again.

Settings Size Frame rate Bit rate Aspect ratio

[FHD] 1920k1080

30p

20 Mbps

16:9

[HD] 1280k720 10 Mbps

[VGA] 640k480 4 Mbps 4:3

Playback

[(] (Playback) button

• Use this to play back pictures.

Cursor buttons

• 2/1: to select the picture

[ ] (Delete/Cancel) button

• [ ]: to delete the displayed picture

100-0001100-0001100-0001

1/51/5

The camera comes with menus that allow you to choose the settings for taking pictures

and playing them back just as you like and menus that enable you to have more fun

with the camera and use it more easily.

1 Press [MENU/SET].

2 Press 3/4/2/1 to select menu and then press [MENU/SET].

∫ Close the menu

Press [ ] repeatedly until the recording/playback screen is displayed.

• When recording images, you can also close the menu by pressing the shutter button halfway.

• There are functions that cannot be set or used depending on the modes or menu settings

being used on the camera due to the specifications.

•

Set the date and time settings in advance.

•

The camera is not capable of connecting to a wireless network via public wireless LAN.

• This owner’s manual refers to both smartphones and tablets as “smartphones” from this point

on unless noted otherwise.

Setting the Menu

Menu Description of settings

[Rec]

The menu lets you set the Coloring, Sensitivity or Number of

pixels, etc. of pictures you are recording.

[Motion Picture]

This menu lets you set the setting for motion pictures such as

recording quality.

[Playback Mode]

This menu lets you select the playback method. The options

include slideshow playback.

[Playback]

This menu lets you make changes to the pictures taken. For

example, you can set protection for the pictures taken, or crop them.

[Setup]

This menu lets you perform the clock settings, beep tone

settings and other settings which make it easier for you to

operate the camera.

[Wi-Fi]

This menu lets you make the settings necessary to connect to

Wi-Fi or use the Wi-Fi function.

3 Press 3/4 to select the menu item and then press [MENU/SET].

• It will switch to the next page when you reach the bottom.

(It will also switch by rotating the zoom lever)

4 Press 3/4 to select the setting and then press [MENU/SET].

•

Depending on the menu item, its setting may not appear or it may be displayed in a different way.

What you can do with the Wi-Fi

function

Controlling with a Smartphone/Tablet

Recording images

remotely with a

smartphone

Playing back pictures

in the camera

Saving images stored

in the camera

Install the dedicated smartphone/tablet app “Panasonic Image App”

on your

smartphone/tablet.

• OS

App for Android

: Android 2.3.3 or higher

Search the Google Play

Store for “Panasonic Image App” or “LUMIX”, and install the app.

App for iOS: iOS 6.0 or higher (Please note that the iPhone 3GS is not supported.)

> Search the App Store

for “Panasonic Image App” or “LUMIX”, and install the app.

• Use the latest version.

• Supported OSs are current as of January 2015 and are subject to change.

• Read the [Help] in the “Image App” menu for further details on how to operate.

• The screen differs depending on the OS.

•

The screens and procedures described from this point on are those at the time when the model first

became available for purchase. The screens and procedures may change with version updates.

• Some smartphones/tablets may not work correctly.

For information on the “Image App”, refer to the support site below.

http://panasonic.jp/support/global/cs/dsc/

¢ In this manual, the app is referred to as “Image App”.

When sending images to PC

Sending an image each

time a recording is

made

Sending selected

images

Connecting to a smartphone/tablet

Using the QR code to set up a connection

(If you are using an iOS device [iPhone

/iPod touch

/iPad

])

1 Press and hold [Wi-Fi].

• The QR code will be displayed on the camera screen.

2 Start “Image App” on your smartphone.

3 Select [QR code], and then select [OK] .

Using “Image App ”, scan the QR code displayed on the screen of the camera.

5 Install the profile.

• A message will be displayed on the browser.

•

If the smartphone is locked with a passcode, enter the passcode to unlock the smartphone.

Cancel

SSID:

Password:

Please set on your smartphone

Please scan the QR code using "Image App",

or enter the password into Wi-Fi settings

SSID

QR code

∫ Entering a password to set up a connection

1 Press and hold [Wi-Fi].

• The Password will be displayed on the camera screen.

2 Turn on the Wi-Fi function in the setting menu of the smartphone.

Select the SSID displayed on the screen of the camera.

4 Enter the password displayed on the screen of the

camera.

• If you are using an Android device, marking the box for

password display will allow the device to display the

password as you enter it.

5 On the smartphone, start “ Image App”.

∫ Recording images with the smartphone/tablet (remote recording)

1 Connect to a smartphone.

2 Select [ ] on the screen of “Image App”.

• The recorded images are saved in the camera.

• Motion pictures cannot be recorded.

∫ Playing back the camera’s images on the smartphone/tablet

1 Connect to a smartphone.

2 Select [ ] on the screen of “Image App”.

• You can switch the images to be displayed by selecting the

icon (

) on the top left of the screen. To display images

stored in the camera, select [LUMIX].

3 Touch an image to enlarge it.

• Motion pictures cannot be played back.

∫ Saving the camera’s images in the smartphone/tablet

1 Connect to a smartphone.

2 Select [ ] on the screen of “Image App”.

3 Touch and hold an image, and drag it to save it.

You can connect the camera to a PC via a wireless access point and send pictures and

motion pictures recorded with the camera to the PC.

• Create a PC user account [account name (up to 254 characters) and password (up to

32 characters)] consisting of alphanumeric characters.

An attempt to create a receive folder may fail if the account includes non-alphanumeric characters.

6 Press the home button to close the browser.

7 Turn on the Wi-Fi function in the setting menu of the smartphone.

8 Select the SSID displayed on the screen of the camera.

9 Return to the home screen, and then start “Image App”.

• Steps 2 through 6 are not required from the second time on.

Using the QR code to set up a connection

(If you are using an Android device)

1 Press and hold [Wi-Fi].

• The QR code will be displayed on the camera screen.

2 On the smartphone, start “ Image App”.

3 Select [QR code].

Using “Image App”, scan the QR code displayed on the screen of the camera.

Controlling the camera with the smartphone/tablet

Setting up a connection to a PC

Creating a destination folder for images

Wi-Fi

0123456789ABC

Cancel

SSID:

Password:

Please set on your smartphone

Please scan the QR code using "Image App",

or enter the password into Wi-Fi settings

QR code

Cancel

SSID:

Password:

Please set on your smartphone

Please scan the QR code using "Image App",

or enter the password into Wi-Fi settings

SSID

Password

Wi-Fi

0123456789ABC

(For Windows)

Supported OS: Windows Vista

/Windows

7/Windows

8/Windows

8.1

Example: Windows 7

1 Select a destination folder, then right-click.

2 Select [Properties], then enable sharing of the folder.

• For details, refer to the operating instructions of your PC or Help on the OS.

(For Mac)

Supported OS: OS X v10.5 to v10.10

Example: OS X v10.8

1 Select a destination folder, then click the following items:

[File] > [Get Info]

2 Enable sharing of the folder.

• For details, refer to the operating instructions of your PC or Help on the OS.

You can send pictures and motion pictures recorded with this unit to a PC.

The connection methods described in this manual are examples. For details on other

connection methods, refer to “Owner’s Manual for advanced features (PDF format)”.

Preparations:

• If the workgroup of the destination PC has been changed from the standard setting, you also

need to change the setting of this unit in [PC Connection].

1 Press [Wi-Fi].

2 Press 3/4/2/1 to select [New Connection], and then press [MENU/SET].

3 Press 3/4 to select the sending method.

4 Press 3/4 to select [PC], and then press [MENU/SET].

5 Select the connection method.

6 On the camera, perform the operation that matches your purpose.

• When the PC you want to connect to is not displayed, select [Manual Input], and enter

the computer name of the PC (NetBIOS name for Apple Mac computers).

• Folders sorted by the sent date are created in the specified folder, and pictures are saved in

those folders.

•

If the screen for a user account and password entry appears, enter the one you set on your PC.

• When the computer name (NetBIOS name for Apple Mac computers) contains a space

(blank character), etc., it may not be recognized correctly. If a connection attempt fails, we

recommend that you change the computer name (or NetBIOS name) to the one consisting of

only alphanumeric characters, with a maximum of 15 characters.

Connect the computer and camera with the USB connection cable (supplied).

2 Press 4 to select [PC], and then press [MENU/SET].

3 Drag and drop files and folders in the camera to the PC.

• When the image transfer is complete, disconnect the USB connection cable safely.

Sending images to the PC

Sending an image each time you record it ([Send

Images While Recording])

Available file format: JPEG

Sending selected images ([Send Images Stored in the

Camera])

Available file format: JPEG/MP4

Example: Selecting [WPS (Push-Button)] to set up a connection

1 Press [MENU/SET].

2 Select [WPS (Push-Button)].

3 Press and hold the WPS button of the wireless

access point until it switches to WPS mode.

(Example)

[Send Images While Recording]

1 Select the PC you want to connect to and the destination folder.

2 Take a picture with the camera.

[Send Images Stored in the Camera]

1 Select the PC you want to connect to and the destination folder.

2 Select [SINGLE] or [MULTI], and then select the images you want to send.

Transferring images to a PC by using the USB connection cable (supplied)

Cancel

Select

Set

Select a function

Remote Shooting & View

Send Images While Recording

Send Images Stored in the Camera

Via Network

Connect to the

network (AP)

Cancel

USB Connection Cable

[AV OUT/DIGITAL] socket

• This socket is also used

when charging the battery.

∫ Playback and editing on a PC

Software for image playback or editing is not supplied with this product.

• To play back or edit still pictures, use standard software.

• To play back motion pictures, use the following software:

QuickTime/iTunes, provided by Apple

(Software supporting MP4 format is required.)

• If software is not installed on your PC, download it from the website of the software provider.

• For information on how to use software, contact the software provider.

•

This phenomenon occurs when charging in a location where the temperature is very high or very low.

Reconnect the USB connection cable (supplied) in a location where the ambient temperature (and

the temperature of battery) is in a 10

C to 30

C (50

F to 86

F) range, and try charging again.

• This is characteristic of MOS sensors which serve as the camera’s pickup sensors.

This is not a malfunction.

• This is characteristic of MOS sensors which serve as the camera’s pickup sensors. It

appears when the subject has a bright part. Some unevenness may occur in the surrounding

areas, but this is not a malfunction.

It is recorded in still pictures or motion pictures.

(General tips for using a Wi-Fi connection)

• Try [Reset Wi-Fi Settings] in the [Setup] menu.

• Use within the communication range of the device to be connected.

• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency

operated nearby?

> Radio waves may get interrupted when used simultaneously. Use them sufficiently away

from the device.

• When the battery indicator is flashing red, the connection with other equipment may not start

or the connection may be disrupted.

(A message such as [Communication error] is displayed.)

• If you place the camera on a metal table or shelf, the radio waves may be adversely affected.

In such cases, you may not be able to establish a connection. Move the camera away from

the metal surface.

(About a wireless access point)

• Check if the wireless access point to connect is in operating state.

• The camera may not display or connect to a wireless access point depending on the radio

wave condition.

– Move this unit closer to the wireless access point.

– Remove the obstacles between this unit and the wireless access point.

– Change the direction of this unit.

– Change the location and orientation of the wireless access point.

– Perform the [Manual Input].

•

It may not display even if the radio waves exist depending on the setting of the wireless access point.

> Check the settings of the wireless access point.

> When the network SSID of the wireless access point is set not to broadcast, the wireless

access point may not be detected. Enter the network SSID to start the connection or

enable the SSID broadcast of the wireless access point.

• Connection types and security setting methods are different depending on the wireless

access point. (Refer to the operating instructions of the wireless access point.)

• Is the 5 GHz/2.4 GHz switchable wireless access point connected to other equipment using

the 5 GHz band?

> The use of a wireless access point that can use 5 GHz/2.4 GHz simultaneously is

recommended. It cannot be used simultaneously with this camera if it is not compatible.

• It may take longer time to connect depending on the Wi-Fi connection setting of the

smartphone, but it is not a malfunction.

• Is the size of the image too large?

> Reduce the size of the still picture, then transmit.

> Image cannot be transmitted when the battery indicator is flashing red.

Please refer to “Owner’s Manual for advanced features (PDF format)” for details.

Specifications are subject to change without notice.

Digital Camera: Information for your safety

Troubleshooting

If the problem is not resolved,

it may be improved by selecting [Reset] on the [Setup] menu

The charging lamp blinks.

Striping or flicker may appear under lighting such as fluorescent lighting and

LED lighting fixture.

Reddish horizontal streaks appear on the monitor during recording.

A Wi-Fi connection cannot be established.

Radio waves get disconnected.

Wireless access point is not displayed.

It takes long time every time to connect to a smartphone.

Transmission of the image fails midway.

Specifications

Power Source: DC 5 V

Power Consumption: 1.5 W (When recording)

1.0 W (When playing back)

Camera effective

pixels

16,000,000 pixels

Image sensor 1/2.33q MOS sensor, total pixel number 17,500,000 pixels,

Primary color filter

Lens Optical 20k zoom, fl4.3 mm to 86.0 mm (35 mm film camera

equivalent: 24 mm to 480 mm)

Wide: F3.3 to F8.0

Tele: F6.4 to F8.0

Image stabilizer Optical method

Focus range Normal 50 cm (1.6 feet) (Wide)/2.0 m (6.6 feet) (Tele)

to ¶

Macro/

Intelligent auto/

Motion picture

3 cm (0.098 feet) (Wide)/1.0 m (3.3 feet)

(Tele) to ¶

[5k to 8k is 2.0 m (6.6 feet) to ¶]

Scene Mode There may be differences in the above

settings.

Wireless transmitter

AC Adaptor (Panasonic VSK0768):

Information for your safety

Battery Pack (lithium-ion) (Panasonic DMW-BCM13PP):

Information for your safety

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Corporation,

(2) the software owned by third party and licensed to Panasonic Corporation and/or,

(3) open source software

The software categorized as (3) is distributed in the hope that it will be useful, but WITHOUT

ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE.

Please refer to the detailed terms and conditions thereof displayed by selecting [MENU/SET]

> [Setup] > [Version Disp.] > [MENU/SET].

• SDXC Logo is a trademark of SD-3C, LLC.

• HDMI, the HDMI Logo, and High-Definition Multimedia Interface

are trademarks or registered trademarks of HDMI Licensing LLC

in the United States and other countries.

• QuickTime and the QuickTime logo are trademarks or registered

trademarks of Apple Inc., used under license therefrom.

• iPhoto, iTunes, Mac and Mac OS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

• iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc.,

registered in the U.S. and other countries.

• Windows and Windows Vista are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or

other countries.

• App Store is a service mark of Apple Inc.

• Android and Google Play are trademarks or registered

trademarks of Google Inc.

•

The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance

• The Wi-Fi Protected Setup™ Identifier mark is a certification mark

of Wi-Fi Alliance

• “Wi-Fi

” is a registered trademark of Wi-Fi Alliance

• “Wi-Fi Protected Setup™”, “WPA™”, and “WPA2™” are

trademarks of Wi-Fi Alliance

• QR Code is a registered trademark of DENSO WAVE

INCORPORATED.

This product is licensed under the AVC patent portfolio license for the personal and

non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard

(“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a

personal and non-commercial activity and/or was obtained from a video provider licensed to

provide AVC Video. No license is granted or shall be implied for any other use. Additional

information may be obtained from MPEG LA, LLC. See http://www.mpegla.com

Shutter system Electronic shutteriMechanical shutter

Minimum Illumination Approx. 10 lx (when i-low light is used, the shutter speed is 1/30th

of a second)

Shutter speed 4 seconds to 1/2000th of a second

[Starry Sky] Mode: 15 seconds, 30 seconds

Exposure (AE) Program AE (P)/Aperture-Priority AE (A)/

Shutter-Priority AE (S)/Manual Exposure (M)

Metering mode Multiple/Center weighted/Spot

Monitor 3.0q TFT LCD (3:2)

(Approx. 1,040,000 dots) (field of view ratio about 100%)

Microphone Monaural

Speaker Monaural

Recording media Built-in Memory (Approx. 78 MB)/SD Memory Card/SDHC

Memory Card/SDXC Memory Card

Recording file format

Still Picture JPEG (based on “Design rule for Camera File system”, based on

“Exif 2.3” standard)/DPOF corresponding

Motion pictures MP4

Audio compression

format

AAC

Interface

Digital “USB 2.0” (High Speed)

Analog video NTSC

Audio Audio line output (monaural)

Terminal

[AV OUT/DIGITAL] Dedicated jack (8 pin)

[HDMI] microHDMI Type D

Dimensions

(excluding the

projecting parts)

Approx. 107.9 mm (W)k59.9 mm (H)k32.1 mm (D)

[4.25q

(W)

k2.36q

(H)

k1.26q

(D)]

Mass (weight) Approx. 249 g/0.55 lb (with card and battery)

Approx. 223 g/0.49 lb (excluding card and battery)

Operating temperature 0 oC to 40 oC (32 oF to 104 oF)

Operating humidity 10%RH to 80%RH

Language select [ENGLISH]/[ESPAÑOL]

Compliance standard IEEE 802.11b/g/n (standard wireless LAN protocol)

Frequency range used

(central frequency)

2412 MHz to 2462 MHz (1 to 11ch)

Encryption method Wi-Fi compliant WPA

/WPA2

Access method Infrastructure mode

Input: 110 V to 240 V, 50/60 Hz, 0.2 A

Output: 5 V, 800 mA

Voltage/capacity: 3.6 V/1250 mAh

SQT0579~P_eng.fm 2 ページ２０１４年１２月２５日　木曜日　午前９時８分

Panasonic DMC-ZS45 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Panasonic DMC-ZS45

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info