683926
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
BA 873031led N;DE,GB -23816- 2017.10V02
INSTRUCTION MANUAL DIMMER [LED] WITHOUT NEUTRAL WIRE
Technical Features
Safety instructions
Supply voltage
230 V, 50Hz
CAUTION!! DANGER OF LIFE / RISK OF FIRE AND ELECTRIC SHOCK!!
Power consumption
0,7 W
Suitable type of lamps
Dimmable LED lamps
LOAD
LED 1: Dimmable 230V~ LED lamps* (leading edge dimming)
4 - 80 W
Installation and assembly of electrical equipment must be carried out only by professional electrician!
Connect the supply voltage/frequency as stated on the product!
Disconnect device from power supply for wiring and installation purposes!
Check power supply is disconnected!
Defective devices have to be put out of service immediately!
Warranty void if housing opened by unauthorised person!
The electronic circuit is protected against a wide range of external influences. Incorrect operating may occur if
external influences exceed certain limits!
Installation and assembly of electrical equipment must be in accordance with local building and electrical codes!
If the LED lamp don’t turn off completely after the switch-off command, the compensator (included in delivery) must
be installed parallel to the lamp!
LED 2: Dimmable 230V~ LED lamps* (trailing edge dimming).
4 - 200 W
LED 2: Dimmable 12V~ LED lamps* (trailing edge dimming)
with Electronic transformer, type C
1 lamp per transformer /
max. 4 transformers (50W)
Max. number of pushbuttons
unlimited (not compatible with lighted
pushbuttons)
Dimensions
46 x 42 x 13 mm
Weight
23 g
Permitted ambient temperature
Storage temperature
0º … +40ºC
-30º … +70ºC
Type of protection
IP20 according to DIN EN 60529
Important Note
Conformity with Standard
DIN EN 60669-2-1
For all transformers and lamps, please take into account the specifications of the manufacturer!
NOTICE: In order to install the dimmer correctly, its connections must be installed to connecting devices (or
connection terminals) which fulfill with the Standards EN 60998-1, EN 60998-2-1 or EN 60998-2-2.
*Check the technical specification of the lamps.
Description / Installation / Operation
Wiring diagram
Wiring example
Description
Small size dimmer, for flush-mounting (e.g. behind standard pushbutton)
Protected against overload and short circuit. Built-in heat protection.
Controlled by pushbutton.
With or without memory.
One rotary switch to select the minimum light level and to select the connected lamp load (LED1 or LED2).
- LED 1: Dimmable 230V~ LED lamps* (leading edge dimming)
- LED 2: Dimmable 230V~ LED lamps* (trailing edge dimming).
Dimmable 12V~ LED lamps* (trailing edge dimming) with Electronic transformer, type C
For all transformers and lamps, please take into account the specifications of the manufacturer!
Installation
CAUTION! You must select with the rotary switch (LED1 or LED2) the correct type of connected load in
order to avoid damages of the dimmer or the lamps!
PLEASE NOTE! To avoid undesirable effects when the lamps are dimmed to lowest level (e.g. light
flickering) you have to select with the rotary switch the minimum light level!
1 Disconnect installation from power supply and check that power supply is disconnected.
2 Select with the rotary switch the type of lamp / load you will connect (LED1 or LED2).
3 Install the dimmer according to the wiring diagram.
4 Make sure the loads are connected properly and reconnect power supply.
5 Press shortly the pushbutton to switch the lamps on and dim with a long press to the minimum lighting level.
If the lamps are not switched on correct (e.g. light flickering) please select with the rotary switch the appropriate
and correct minimum light level.
Operation
Press shortly the pushbutton to switch the lamps on and off!
=> Switch on „No Mem= Lamp(s) switches on with max. brightness.
=> Switch on „Mem“ = Lamp(s) switches on with the brightness of the last switch off
With a long press you can dim!
**Note: If the LED lamp don’t turn off
completely after the switch-off command,
the compensator (included in delivery)
must be installed parallel to the lamp!
Quick and easy! One rotary switch to set
the lamp load and the minimum light level
Setting the lamp load Check
the technical specification of the
lamps.
Setting the minimum light
level
/ dimming value
**
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Paladin 873 031 led bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Paladin 873 031 led in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info