668497
34
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
34
If for example the display shows 2, this means that the swivelseat-switch is controlled, or that the
wiring to this switch is defect.
In combination with the detail drawing of the wiring (attachment 300901_connect) it should be easy to
solve the problem, if the problem is related to the wiring.
All Exx errors are shown blinking. (for example Error 12 will shown as E, 1, 2, E, 1, 2, E, 1, 2 etc.)
Most Exx errors will generate a fast beep (5Hz).
Exception for error 13,18 and error 97 and 99. These errors does not generate a fast beep.
12.1.2 LED’s on the PCB
There are 4 LED’s mounted on the PCB.
The 3 LED’s left below are mounted for indication of the status of the 375 mA SMD fuse, contact of
overspeed governor (catch) and limitswitch/jumper. (LED 1, 2 & 3).
Also when the flatcable or Board to Board cable (BtB) is forgotten, these 3 Led’s will not light.
The LED near the display shows the status of the PCB. (LED 4)
LED 1,2 & 3 on = Fuse 375 mA (F1) safetyline & contact overspeed governor (catch) and limitswitch (limit) OK.
LED 1,2 & 3 off = Fuse 375 mA (F1) safetyline defect/ sleepmode/ shortcircuit x10-3 to gnd/ flatcable / BTB not mounted
LED 2 & 3 off = Limitswitch (limit) is operated / jumper as interconnection not connected.
LED 2 off = Contact overspeed governor (catch) is operated.
LED 4 on = OK
LED 4 off = 5A fuse defect/ no battery-voltage
LED 4 flashes = Chairlift is in sleepmode
12.1.3 Error-log
The PCB stores the errors in its memory.
By using the buttons left and right on the servicebox you can read out the error-log.
Facts & functions of error-log
- Control right => read the stored errors backwards
- Control left => start at latest stored error
- Control left for 10 sec. => delete error-log
- Every 24 hours (when not in sleepmode) the log stores an underscore
- Errors are only stored when the lift is controlled by armrest left/right or remote up/down.
- When the lift has not moved, the same error will be stored once.
- When the lift has moved, the same error can be stored more then once.
- Maximum of 20 errors or days can be stored.
- The end of the error-log is shown as a minus
Please note that the underscore is not real time. The system only stores the underscore when the
system has been active for 24 hours.
LED
1,2,&3
Led 4
1
2
3
34

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Otolift-One

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Otolift One bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Otolift One in de taal/talen: Engels als bijlage per email.

De handleiding is 4,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info