539426
7
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
4 Mode
4.1 Mode - SETTING
7 / 18 screeneye x
button, confirm with the middle button. Proceed the same way with
the remaining digits. (optional)
The calibration factor can only be set, if the EXPERT View is active
(see chapter 4.1.4 VIEW)
Calibration of the stride sensor improves the accuracy of speed, pace
and distance measurements. It is recommended that you calibrate the
stride sensor before using it for the first time, if there are significant
changes in your running style, if you have new shoes or if you switch
the sensor from your right shoe to your left one. The calibration
should be done at the speed you normally run.
The calibration factor is calculated from the measurement results in
relation to the known path length.
calibration factor = known path length / measured length with sensor
Example:
known path length = 10km
measured length with sensor = 9,940km
calibration factor = 10 / 9,940 = 1.006
The current setting is blinking. Choose the temperature scale “C” or
“F” by pressing the front button and confirm with middle button.
The temperature is displayed only. It is not stored and not transmitted
when reading the data into the computer.
Off is blinking, press the front button to turn on the lap mode. The
current distance is shown. Press middle button to set the distance for
a lap. The first digit is blinking, adjust the value by pressing the front
or rear button, confirm with the middle button. Proceed the same way
with the remaining digits. (optional)
The A.LAP value can only be set, if the EXPERT View is active (see
chapter 4.1.4 VIEW)
This value is the specific distance for one lap. If it is set, the lap will
increase automatically (while the stopwatch is running) when the
distance is reached (this function is optional and works only with the
maxrun foot pod sensor). Read chapter 4.3.1 Stopwatch for further
information.
4.1.3 Setting - PAIR
What is pairing?
Pairing is the connecting of sensors, e.g. your heart rate monitor with
the screeneye x. After you have paired the first time, your screeneye
x automatically recognizes the paired sensor each time it is activated.
This process occurs automatically when you turn on the SPORT
mode and only takes a few seconds when the sensors are activated
and begin functioning correctly. Once paired, your screeneye x
TEMP
A.LAP
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Osynce screeneye x bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Osynce screeneye x in de taal/talen: Engels als bijlage per email.

De handleiding is 0,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Osynce screeneye x

Osynce screeneye x Snelstart handleiding - Nederlands - 1 pagina's

Osynce screeneye x Gebruiksaanwijzing - Deutsch - 18 pagina's

Osynce screeneye x Snelstart handleiding - Deutsch - 1 pagina's

Osynce screeneye x Snelstart handleiding - English - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info