563085
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
6
your foot. The digit “ ” will display. Then the display will show “0.0” This indicates that the
scale has been setup correctly.
a. Note: This “Scale Setup” procedure applies only after installing a battery. After
completing “Scale Setup”, it does not need to be performed again unless battery is
removed and replaced.
b. Note: If you step on the platform before “0.0” appears, you will not obtain a reading. If
this happens, step off the scale, then wait for display to turn off, follow above steps to
setup scale.
SCALE OPERATION
To measure weight, simply stand with both feet in the center of the scale’s glass platform. Be sure to
stand erect and remain still. After 3 seconds the display will flash your weight and then display it steady.
Note: If a weight less than 10kg is placed on the scale, the scale will not activate. To weigh
something less than 10kg, activate the scale first by tapping the front corner (right or left) of the
scale with your foot.
When no weight is on the scale for 10 seconds, the scale will turn off automatically.
GETTING ACCURATE READINGS
1. If the scale has not been used for a long time, proceed as follows:
a. First, step lightly on the front corner (right or left) of the scale first to activate the scale.
b. Second, wait for the scale to turn off. Then you may use the scale normally.
2. If the scale is moved, proceed as follows:
a. remove the battery from the scale for 5 seconds
b. replace the battery
c. follow “Scale Setup” instruction (listed in Preparations Before Use above)
3. Place scale on flat hard surface. Do not use scale on carpet because the reading will be inaccurate.
4. If the reading appears inaccurate, please check if the battery and the contact point are well connected.
If scale has been in use for a long time, replace the battery and try again. If necessary, contact the
local franchisers or contact our company.
USAGE NOTES
1. When the display shows «Err», it means that the scale is overloaded.
2. When the display shows «Lo», it means that the battery is low. Please replace the battery as soon as
possible.
3. If scale display shows random digits or scale does not automatically shut off, proceed as follows:
a. remove the battery for 10 seconds
b. replace battery
c. follow “Scale Setup” instruction (listed in Preparations Before Use above)
Subject to change without notice
Extra information on ORION company web-site www.orion.ua
We take your opinion and offers by E-mail support@orion.ua
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Orion OS-08B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Orion OS-08B in de taal/talen: Engels als bijlage per email.

De handleiding is 0,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info