589148
5
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
5
GB
HOW TO ENABLE OR DISABLE
AUTO-RECEPTION
To disable the automatic signal reception feature, hold down
[ZONE] for 2 seconds. The [ ] will disappear and the RRM-
112A will not receive signal from the US Atomic Clock.
Note: The radio needs to be off before disengaging the signal
reception feature.
To activate the signal reception feature again, hold down the
[ VOLUME + ] button for two seconds.The [ ] signal
will start blinking to initiate reception automatically.
When the automatic reception feature is active, manual settings
will be over-ridden by next signal recepttion.
HOW TO SET THE CALENDAR CLOCK
MANUALLY AND SELECT DAY-OF-THE-
WEEK DISPLAY LANGUAGE
When the automatic signal reception feaure is disengaged, the
RRM-112A can be manually set and will operate as quartz clock. To
manually set the RRM-112, the clock needs to be in normal time
display mode.
1. Press [CLOCK] for two seconds and the hours digits will start
flashing.
2. Enter the hours using the VOLUME [ + ] and VOLUME [ - ]
buttons. Hold down either button to rapidly increase or decrease
the value.
3. Press [CLOCK]. Minutes digits will flash.
4. Enter the minutes using the VOLUME [ + ] and VOLUME [ - ]
button.
5. Press [CLOCK].
6. Follow the same procedure to set the year, month, day and the
display language (English, French and Spanish).
Press [CLOCK] to save the changes and exit. If changes are made after the
minute adjustment, the seconds will reset and start from zero.
The unit will also save all changes and return to normal display
automatically after the unit has been left idle for 1 minute.
HOW TO SET THE ALARM
1. Select between Beep-Alarm-On, Radio-Alarm-On and Alarm-
Off mode by pressing the [ ON / OFF ] button.
2. Press and hold [ ON / OFF ]for two seconds. Hours digits
will flash.
3. Use VOLUME [ + ] / [
-
] to enter the hours.
4. Press [ ON / OFF ]. Minutes digits will flash.
5. Use VOLUME [ + ] / [
-
] to enter the minutes.
6. Press [ ON / OFF].
7. If the Radio Alarm-On mode has been selected, press [AM / FM]
to select the correct frequency and then [STATION] to select the
radio station.
8. Press [ ON / OFF ].
9. Use VOLUME [ + ] / [
-
] to set the volume. Of the wake up radio.
10.Press [ ON / OFF ] to exit.
11. In Beep Alarm-On mode, a 2-minute crescendo alarm will sound
when alarm is active. In Radio Alarm-On mode, the radio will
remain on for 2-hours before turning off automatically if not
manually deactivate.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oregon Scientific RRM112A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oregon Scientific RRM112A in de taal/talen: Engels als bijlage per email.

De handleiding is 0,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info