589177
5
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
5
EN
ABOUT THE TEMPERATURE ALARM
Whenever the alarm is activated, the alarm will sound for 1
minute when the current temperature rises and crosses the
high or low temperature alarm limit.
If the unit is left unattended, the alarm will stop automatically
after 1 minute to conserve power but will issue a 3-second
repeater ‘beep’ sound every minute for up to 12 hours as a
continued warning that the temperature has moved outside
the alarm limit.
The repeater alarm will continue to sound even if the
temperature later returns to the allowed temperature band,
until the alarm is deactivated.
NOTE If the unit shows the MAX/MIN DISPLAY MODE,
the respective alarm indicator – either HI or LO will flash
continuously for up to 12 hours, or until the alarm is
deactivated.
If the unit shows the HI/LO DISPLAY MODE, the respective
alarm limit digit will flash continuously for up to 12 hours, or
until the alarm is deactivated.
HOW TO SELECT THE ON / OFF OF THE
TEMPERATURE ALARM
Activating the Alarm
1. Slide the [ALARM ON / OFF] switch to the ON position
to activate the temperature alarm.
NOTE If the [ALARM ON / OFF] switch is in the OFF position
and the temperature has already risen / dropped and passed
the high or low limit, at that instant, no alarm will sound if
the [ALARM ON/OFF] is switched to the ON position so
that no alarm will sound.
Deactivating the Alarm
1. When the alarm sounds, the alarm can be stopped by
pressing either the [HI], [LO] or [MEMORY CLEAR]
buttons.
The Thermometer will sound the alarm again next time,
when the temperature rises and passes the high or low
temperature alarm limit.
2. Slide the [ALARM ON / OFF] switch to the OFF position,
to switch off the alarm permanently.
NOTE Indoor high / low temperature alarm limit can be set
to work whenever the outdoor sensor probe is removed.
NOTE Outdoor high / low temperature alarm limit can be
set to work whenever the outdoor sensor probe is inserted
into the sensor jack.
HOW TO SET THE HIGH / LOW TEMPERATURE
ALARM LIMITS
The unit must show the HI/LO DISPLAY MODE to allow the
alarm to be set.
To set the high temperature alarm limit, press the [HI] button
to increase by 1° increments until the desired high
temperature alarm limit is displayed.
NTS912manual-E 04/12/15, 5:39 PM5
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oregon Scientific NTS912 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oregon Scientific NTS912 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Oregon Scientific NTS912

Oregon Scientific NTS912 Gebruiksaanwijzing - Français - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info