589394
2
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
2
GB
HOW TO ENABLE OR DISABLE AUTO-
RECEPTION
To disable the automatic signal reception feature and cause the
BHM-612A to operate as a quartz clock, hold down [ZONE] for
three seconds.
To enable the feature again, hold down the [UP] button for three
seconds. The RF signal display will start scanning to initiate
reception automatically.
HOW TO SET THE CALENDAR CLOCK
MANUALLY
When the current time is displayed:
Press [ MODE / SET ] for two seconds. Hours digits will
flash.
Set the hour using [ UP ].
Press [ MODE / SET ]. Minutes digits will flash.
Set the minutes using [ UP ].
Press [ MODE / SET ].
Follow the same pattern to enter year, month, day and the
display language for the weekday. You can choose among E
(English), F (French) and S (Spanish).
Press [ MODE / SET ] to save the changes and exit.
If changes are made during the process, the seconds of the clock
will reset and start from zero. The unit will also save all changes
and return to normal display automatically after the unit has been
left idle for a minute.
HOW TO SET AND USE THE ALARM
To set the alarm time:
1. Press [ ALARM] to display the alarm time.
2. Press and hold [ ALARM ] for two seconds. Hours digits
will flash.
3. Set the hours using [ UP ].
4. Press [ALARM ]. Minutes digits will flash.
5. Set the minutes using [ UP ].
6. Press [ ALARM ] to save and exit. The alarm clock will be
activated automatically during the setting procedure.
To activate or deactivate the alarm during normal display.
Press [ ALARM ] to display the alarm time.
Press [ ALARM ] to change the status of the alarm. The
respective indicator will appear.
When the alarm goes off, the alarm sound will gradually increase
in volume and speed. The alarm will continue to sound for
approximately two minutes unless interrupted when any button
is pressed. If the alarm is not interrupted, after 2 minutes the
alarm will silence itself and reactivate after approximately eight
minutes.
Battery
Holder
Screw
DISPLAY MODES
In normal display, the current time, with seconds, will be
displayed in the main window and the date will be displayed in
the secondary window.
To display the weekday in the main window, press
[ MODE / SET ] once. Press the button again to display seconds.
To display the alarm time in the secondary window, press
[ ALARM ] once. Press [ MODE / SET ] to display the date.
ABOUT RECEPTION OF RADIO SIGNAL
The BHM-612A is designed to automatically synchronize its
current time and date when within range of the U.S. Atomic
Clock.
When the unit is within range, its radio-control mechanism will
override all manual settings. The benefit of a RF controlled
clock is sustained accuracy without the need of manual adjustment.
Complete signal reception generally takes about 2 to 10 minutes,
depending on the strength of the radio signal. When the reception
is completed, the signal display will be stable. After that, the
periodical scanning will only take a few seconds.
For better reception of radio signals, place the clock away from
metal objects and electrical appliances to minimize interference.
SIgnal Search Mode.
Signal Reception Mode
No Signal Received
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oregon Scientific BHM612A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oregon Scientific BHM612A in de taal/talen: Engels als bijlage per email.

De handleiding is 0,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info