492490
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
8
GB
To set an alarm:
1.
Press [ ] once to select ALARM 1 or again to select ALARM 2
the last selected time of the alarm will be displayed. If you have
never set the alarm before, the time will be displayed as 0:00.
2.Press [
] for three seconds. The hour digits will blink.
3.Enter the hour using
and .
4.Press [
]. The minute digits will blink.
5.Enter the minutes using
and .
6.Press [
] to exit. The [ ] icon for the alarm chosen will
be displayed indicating the alarm set above is now armed.
You can also arm or disarm an alarm by pressing the [AL ON/OFF]
button.
When an alarm is armed, it will go off at the set time.
The four-step crescendo function allows the alarm to start off
gently and step up its intensity every 20 seconds for four times.
Without interruption, the alarm will go off for a total of two
minutes.
If a second alarm goes off when the first alarm is sounding off, the
first alarm will be disabled automatically.
HOW TO STOP AN ALARM
To stop an alarm, you can use either press [ ] button or [AL ON/
OFF] button.
Pressing [
] will stop the alarm, which is still armed and will
activate at the set time the following day.
If [AL ON/OFF] button is pressed instead, the alarm will be stopped
and deactivated all together.
NOTE ON OUTDOOR-REMOTE
TEMPERATURE
Once batteries are in place in the remote unit, it will start
transmitting samplings at 30-second intervals.
If no signals are received when the outdoor-remote temperature is
selected, “
” will be displayed. To force the main unit to
search for remote sensor signals, press MEM and CHANNEL
buttons simultaneously.
If that fails, check that the remote sensor is still in place. Make sure
the transmission is within range and the path is clear of obstacles
and interference.
NOTE ON SETTING REMOTE SENSOR
CHANNELS
The unit has an auto-scan function that sequentially displays
temperature readings of up to three remote sensors. In order to
function properly, each remote sensor must be set to different
channels.
THE RESET BUTTON
The button is only used when the unit is operating in an unfavorable
way or malfunctioning. Use a blunt stylus to hold down the button.
All settings will return to their default values.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Oregon-Scientific-BAR112

Zoeken resetten

  • Oké binnentemperatuur klopt niet, is veel te hoog (27:5 C). Ik heb de memory knop 3 seconden en later ook langer ingedrukt. Dit helpt niet. Zijn er nog meer mogelijkheden om de reële temperatuur zichtbaar te krijgen? Hartelijk dank voor een oplossing, Tilly Gesteld op 30-9-2020 om 15:36

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oregon Scientific BAR112 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oregon Scientific BAR112 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Oregon Scientific BAR112

Oregon Scientific BAR112 Gebruiksaanwijzing - Nederlands - 11 pagina's

Oregon Scientific BAR112 Gebruiksaanwijzing - Français - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info