645312
57
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
57
Troubleshooting
—Continued
Symptom Possible cause Remedy
Audio
The surround back speak-
ers produce no sound?
The level of the surround back speaker is set
at minimum.
Check the volume of the surround back
speaker (page 49).
The Surround Back setting is set to None in
the Speaker Configuration.
Check the Surround Back setting in the
Speaker Configuration (page 32).
The selected listening mode doesn’t use the
surround back speakers.
Select another listening mode. See page 42
for information on listening modes.
Surround speaker output depends on the
source material, and some material may not
use the surround speakers much.
If you’re playing a Dolby Digital EX or
DTS-ES source, make sure that the Dolby
Digital/DTS setting is set to On (page 44).
A low-frequency noise or
hum can be heard?
The audio connecting cables at the rear of
the TX-SR502/TX-SR502E are too close to
the power cord.
Untangle the audio cables and position them
as far away as possible from the power cord.
The sound is too bright or
harsh and the high range is
not clear?
The treble is set too high. Adjust the treble (page 38).
The subwoofer is not work-
ing or is very quiet?
The Subwoofer setting is set to No in the
Speaker Configuration.
Check the Subwoofer setting in the Speaker
Configuration (page 32).
The volume of the subwoofer is set at mini-
mum.
Check the volume of the subwoofer
(page 49, 35).
Speaker set A is turned off. The subwoofer
output does not work while only speaker set
B is on.
Turn on speaker set A.
Video
There’s no picture on the
TV?
The Pure Audio listening mode is selected.
When this mode is selected, the display and
the internal video circuits are all turned off
and no video signals are output.
The TV’s input selector is set incorrectly.
Select the correct input on the TV (i.e., the
input to which the TX-SR502/TX-SR502E is
connected).
The video input and output are different for-
mats.
The TX-SR502/TX-SR502E doesn’t convert
between video formats. It works as a video
signal switcher. Composite video input sig-
nals are output only by composite video out-
puts. S-Video input signals are output only
by S-Video outputs. And component video
input signals are output only by component
video outputs.
Remote controller
The buttons on the
TX-SR502/TX-SR502E work
OK but those on the remote
controller don’t?
The wrong remote controller mode is
selected.
Select the correct mode (page 10).
The batteries are installed incorrectly.
Check the batteries and correct as necessary
(page 9).
You’re not pointing the remote controller at
the TX-SR502/TX-SR502Es remote sensor.
Point the remote controller at the TX-SR502/
TX-SR502E’s remote sensor (page 9).
Can’t use the remote con-
troller with other AV com-
ponents?
You’ve connected a MiniDisc recorder or
CD recorder to the TX-SR502/TX-SR502E
but haven’t changed the TAPE/MD/CDR
display.
Press and hold the [TAPE] input selector
button until MD or CDR, as appropriate,
appears on the display.
The wrong remote control code has been
entered.
If more than one code is listed, try each one
(page 50).
With some AV components, certain buttons
may not work as expected and some may not
work at all.
You’re pointing the remote controller at the
wrong AV component.
To control a component connected via ,
point the remote controller at the TX-SR502/
TX-SR502E. To control a component that’s
not connected via , point the remote con-
troller at that component (page 50)
You’ve made an connection but not an
analog audio connection (RCA).
To use , you must make an connection
and an analog audio connection (RCA)
between the component and TX-SR502/
TX-SR502E, even if they are connected dig-
itally (page 30).
TX-SR502_En.book Page 57 Tuesday, February 17, 2004 12:14 PM
57

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-SR502 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-SR502 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo TX-SR502

Onkyo TX-SR502 Gebruiksaanwijzing - Nederlands, Deutsch - 236 pagina's

Onkyo TX-SR502 Gebruiksaanwijzing - Français - 120 pagina's

Onkyo TX-SR502 Gebruiksaanwijzing - Italiano - 236 pagina's

Onkyo TX-SR502 Gebruiksaanwijzing - Espanõl - 120 pagina's

Onkyo TX-SR502 Gebruiksaanwijzing - Svenska - 236 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info