645326
69
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
69
Troubleshooting—Continued
The subwoofer produces no sound
The subwoofer outputs no sound while only speaker
set B is on. Turn on speaker set A.
If the source material contains no audio in the LFE
channel, the subwoofer produces no sound.
Check the “3. Sp Config” (page 54).
On the AV receiver, the subwoofer setting in the “3. Sp
Config” is set to “No”. Set the subwoofer setting to
“Yes”.
There’s no sound with a certain signal format
Check the digital audio output setting on the source
component. On some game consoles, such as those
that can play DVDs, the default setting is off.
With some DVD-Video discs, you need to select an
audio format from a menu or with the [AUDIO] button
on your DVD player’s remote controller.
Can’t get 5.1-channel playback
When speaker B is turned on, speaker set A is reduced
to 2.1-channel playback.
The volume cannot be set to 79
After the Audyssey 2EQ™ Room Correction and
Speaker Setup function has been run, or the volume
level of each individual speaker has been adjusted
(pages 33 and 56), the maximum volume may be
reduced.
When the levels of each speaker have been adjusted
(page 56), the maximum possible volume may be
reduced.
Noise can be heard
Using cable ties to bundle audio cables with power
cords, speaker cables, and so on can degrade audio
performance, so don’t use them.
An audio cable may be picking up interference. Try
repositioning your cables.
The Late Night function doesn’t work
Make sure that the source is Dolby Digital (page 60).
About DTS signals
When playing DTS program material, using the pause,
fast forward, or fast reverse function on your player
may produce a short audible noise. This is not a
malfunction.
When DTS program material ends and the DTS
bitstream stops, the AV receiver remains in DTS
listening mode and the DTS indicator remains on.
This is to prevent noise when you use the pause, fast
forward, or fast reverse function on your player. If you
switch your player from DTS to PCM, as the AV
receiver does not switch formats immediately, you
may not hear anything, in which case you should stop
your player for about 3 seconds, and then resume
playback.
With some CD players, you won’t be able to playback
DTS material properly even though your player is
connected to a digital input on the AV receiver. This is
usually because the DTS bitstream has been processed
(e.g., output level, sampling rate, or frequency
response changed) and the AV receiver doesn’t
recognize it as a genuine DTS signal. In such cases,
you may hear noise.
There’s no picture
Make sure that all video connecting plugs are pushed
in all the way (page 18).
Make sure that each video component is properly
connected.
On your TV, make sure that the video input to which
the AV receiver is connected is selected.
The AV receiver does not convert between formats, so
if a video source component is connected to a
component video input, your TV must be connected to
the component video output (page 19).
If the video source is connected to an HDMI input,
your TV must be connected to the HDMI OUT
(page 19).
There’s no picture from a source connected to
an HDMI IN
Reliable operation with an HDMI-to-DVI adapter is
not guaranteed. In addition, video signals from a PC
are not supported (page 21).
If the message “Resolution Error” appears on the AV
receiver’s display, this indicates that your TV does not
support the current video resolution and you need to
select another resolution on your DVD/BD player.
Reception is noisy, stereo FM reception suffers
from hiss, or the FM STEREO indicator doesn’t
light up
Relocate your antenna.
Move the AV receiver away from your TV or
computer.
Listen to the station in mono (page 43).
When listening to an AM station, operating the remote
controller may cause noise.
Passing cars and airplanes can cause interference.
Concrete walls weaken radio signals.
If nothing improves the reception, install an outdoor
antenna.
The remote controller doesn’t work
Make sure that the batteries are installed with the
correct polarity (page 12).
Install new batteries. Don’t mix different types of bat-
teries, or old and new batteries (page 12).
Make sure that the remote controller is not too far
away from the AV receiver and there’s no obstruction
between the remote controller and the AV receiver’s
remote control sensor (page 12).
Video
Tuner
Remote Controller
69

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Onkyo-TX-SR307

Zoeken resetten

  • Ik wil graag een karaokemicrofoon kunnen aansluiten. Welke frontopening moet ik gebruiken en hoe werkt het dan ? Gesteld op 18-1-2023 om 16:09

    Reageer op deze vraag Misbruik melden
  • aan uitzetten met afstand bediening van de versterker werkt niet. Ook niet als je receiver en dan AAN/UIT indrukt
    Gesteld op 27-2-2022 om 23:26

    Reageer op deze vraag Misbruik melden
  • From Showgirls to Cats, The Golden Raspberries have been 'celebrating' terrible movies for four decades. Are they harmless fun – or past their sell-by date, asks Nicholas Barber. Gesteld op 29-3-2021 om 21:35

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-SR307 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-SR307 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo TX-SR307

Onkyo TX-SR307 Gebruiksaanwijzing - Nederlands - 144 pagina's

Onkyo TX-SR307 Gebruiksaanwijzing - Deutsch - 144 pagina's

Onkyo TX-SR307 Gebruiksaanwijzing - Français - 144 pagina's

Onkyo TX-SR307 Gebruiksaanwijzing - Italiano - 144 pagina's

Onkyo TX-SR307 Gebruiksaanwijzing - Espanõl - 144 pagina's

Onkyo TX-SR307 Gebruiksaanwijzing - Svenska - 144 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info