553756
71
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
71
FM/AM TUNER
AM stations cannot be received.
AM loop antenna is not connected.
Connect the included AM loop antenna to the AM antenna
terminals.
Buzzing noise on AM stations (particularly
noticeable at night or with weak stations).
Noise from electrical apparatus such as fluorescent lamp.
Move the AM loop antenna to different position.
Set up an outdoor AM antenna.
Noise is heard at high-pitched sounds on AM
stations.
Noise from TV set.
Place the AM loop antenna as far as possible from the TV.
Move unit away from TV set.
Crackling noise on both AM and FM stations.
Noise caused by fluorescent lamp being turned on and off.
Move antenna as far as possible from the fluorescent lamp.
Noise from automobile ignition.
Install an FM outdoor antenna as far as possible from the
road.
Change the position or direction of the outdoor antenna.
The indicators light for stereo reception, but
sound is distorted and stereo separation is bad.
Station is too strong.
Change to FM indoor antenna.
Multiple reflection of the radio waves because of tall buildings
or mountains.
Use antenna that has better directivity and select a point
where distortion is least.
Indicators for stereo reception flicker and hiss is
heard on FM stations.
Station is too weak.
Install an outdoor FM antenna.
Stereo FM broadcasts cover only about half the distance of an
ordinary broadcast.
Change the position or direction of the outdoor antenna.
No preset station is recalled.
Power cord has been unplugged or the POWER switch has
been turned off for a long time.
The memory contents are lost. Store all stations again.
VIDEO and AUDIO
Desired picture does not appear.
Improper connection.
Check the connection again. Insert the plugs and
connectors completely.
Video Setup sub-menu of Input Setup menu settings are
incorrect.
Check Settings.
No OSD Menu display.
Improper connection.
Check connections.
OSD Menu is displayed when monitor is connected to VIDEO
or S VIDEO of MONITOR OUT.
Confirm connections.
Monitor is connected to MONITOR OUT VIDEO when the
OSD output is set to S Video or monitor is connected to
MONITOR OUT S VIDEO when the OSD output is set to
Video.
Check the OSD Config sub-menu of OSD Setup (page 29).
Picture and sound do not match.
Improper connection.
Check connections.
Video Setup sub-menu of Input Setup menu settings are
incorrect.
Check settings.
No sound, or sound of the selected source is not
heard.
Digital Setup sub-menu of Input Setup menu settings are
incorrect.
Check settings.
No picture appears on the TV screen (or monitor).
TV (or monitor) is not set to receive the output signals from the
receiver.
Set the TV (or monitor) to the receiver input.
Video cable is not connected securely.
Check connections.
S VIDEO IN signal is output at VIDEO OUT and S VIDEO
OUT, but VIDEO IN signal is only output at VIDEO OUT.
Also, COMPONENT VIDEO IN signal is only output at
COMPONENT VIDEO OUT.
Check the input and output signals.
Troubleshooting guide
71

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-DS787 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-DS787 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo TX-DS787

Onkyo TX-DS787 Gebruiksaanwijzing - Français - 74 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info