462131
46
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
46
Troubleshooting—Continued
The remote controller doesn’t work
Make sure that the batteries are installed with the cor-
rect polarity (page 6).
Install new batteries. Don’t mix different types of bat-
teries or old and new batteries (page 6).
Make sure that the remote controller is not too far
away from the receiver, and that there’s no obstruction
between the remote controller and the receiver’s
remote control sensor (page 12).
Make sure that the receiver is not subjected to direct
sunshine or inverter-type florescent lights. Relocate if
necessary (page 12).
Can’t control other components
If you have connected an -capable Onkyo DS
-
A1
Remote Interactive Dock to the TAPE IN or
VCR/DVR IN jacks for the remote controller to work
properly, you must set the input display to HDD (see
page 22).
If it is an Onkyo component, make sure that the
cable and analog audio cable are connected properly.
Connecting only an cable won’t work (page 20).
With some components, certain buttons may not work
as expected, and some may not work at all.
To control an Onkyo component that’s connected via
, point the remote controller at the receiver.
Can’t record
On your recorder, make sure the correct input is
selected.
To prevent signal loops and damage to the receiver,
input signals are not fed through to outputs with the
same name (e.g., TAPE IN to TAPE OUT, or
VCR/DVR IN to VCR/DVR OUT).
When the Pure Audio function is selected, recording is
not possible because no video signals are output. Dis-
able the function before recording.
The display doesn’t work
The display is turned off when the Pure Audio func-
tion is selected.
The functions don’t work
To use , you must make an connection and an
analog audio connection (RCA) between the compo-
nent and receiver, even if they are connected digitally
(page 20).
While Zone 2 is selected, the functions don’t
work.
Remote Controller
Recording
Others
The receiver contains a microcomputer for signal
processing and control functions. In very rare
situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the
unlikely event that this happens, unplug the power cord
from the wall outlet, wait at least ve seconds, and then
plug it back in again.
Onkyo is not responsible for damages (such as CD
rental fees) due to unsuccessful recordings caused by
the unit’s malfunction. Before you record important
data, make sure that the material will be recorded
correctly.
Before disconnecting the power cord from the wall
outlet, set the receiver to Standby.
Memory Backup
The receiver uses a battery-less memory backup
system in order to retain radio presets and other
settings when it’s unplugged or in the case of a power
failure. Although no batteries are required, the receiver
must be plugged into an AC outlet in order to charge the
backup system. Once it has been charged, the receiver
will retain the settings for several weeks, although this
depends on the environment and will be shorter in
humid climates.
46

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Onkyo-TX-8555

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TX-8555 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TX-8555 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo TX-8555

Onkyo TX-8555 Gebruiksaanwijzing - Nederlands - 96 pagina's

Onkyo TX-8555 Gebruiksaanwijzing - Deutsch - 96 pagina's

Onkyo TX-8555 Gebruiksaanwijzing - Français - 96 pagina's

Onkyo TX-8555 Gebruiksaanwijzing - Italiano - 96 pagina's

Onkyo TX-8555 Gebruiksaanwijzing - Espanõl - 96 pagina's

Onkyo TX-8555 Gebruiksaanwijzing - Svenska - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info