608263
14
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
14
Cassette deck main-
tenance
This deck requires no lubrication.
Head, Pinch Roller and Capstan Cleaning
Playback sound quality can be greatly diminished if magnetic
particles are allowed to accumulate on the recording/playback
head or playback head. Be sure to clean the head periodically,
normally 2 - 3 times a month, to maintain your deck’s original
performance. Dirty heads may cause:
Poor sound quality (lose of high frequency response)
Decreased volume
Skipping
Incomplete erasure of previous recordings
If the pinch rollers and capstan are dirty, the tape may become
tangled and damaged by wrapping around the pinch roller and
capstan.
To prevent these problems, clean the heads, pinch rollers and
capstans with a cotton swab dipped in cleaning fluid.
Demagnetizing
Residual magnetism builds up in the heads after the cassette deck
has been used for an extended period of time. This buildup
introduces noise and static into tapes and impairs high frequency
response. To prevent this, demagnetize the heads with any
commercially available head eraser once every 50 hours of use.
Refer to the instruction manual of the head eraser for detailed
instructions.
Specifications
Track Format: 4-track, 2-channels
Erasure System: AC erase
Tape Speed: 4.8 cm/sec. (1-7/8 i.p.s.)
9.6 cm/sec. (3-3/4 i.p.s.) (high-speed
dubbing)
Wow and Flutter: 0.08 % (WRMS)
Frequency Response: 20 — 15,000 Hz (Normal)
(30 — 14,000 Hz ± 3 dB)
20 — 16,000 Hz (High)
(30 — 15,000 Hz ± 0 dB)
20 — 17,000 Hz (Metal)
(30 — 16,000 Hz ± 0 dB)
S/N Ratio: Dolby NR off: 58 dB (metal position
tape)
A noise reduction of 10 dB above
5 kHz and 5 dB at 1 kHz is possible
with Dolby B NR.
A noise reduction of 20 dB at 5 kHz
is possible with Dolby C NR.
Input Jacks: Line IN: 2
Input sensitivity: 80 mV
Input impedance: 50 kohms
Outputs: Line OUT: 2
Standard output level: 500 mV
(0 dB)
Optimum load impedance: over
50 kohms
Motors: DC servo motor × 2
Heads: REC/PB: 1
PB: 1
ERASE: 1
Power Supply: TA-RW144:
AC 120 V, 60 Hz
TA-RW244:
AC 230 V, 50 Hz
AC 120 V and 220-230 V,
Switchable 50/60 Hz
(Worldwide model)
Power Consumption: 17 watts
Dimensions: 455(W) × 120(H) × 305(D) mm
(17-15/16" × 4-3/4" × 12")
Weight: 5.2 kg. (11.5 lbs.)
Specifications and external appearance are subject to change
without notice because of product improvements.
Pinch rollers
Erase head
(DECK B only)
REC/PB head
Capstans
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo TA-RW244 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo TA-RW244 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info