601422
136
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
136
Using the Remote Controller with Other Components
—Continued
You can teach the RDC-7.1s remote controller new
commands simply by transmitting commands from
another remote controller one at a time. For example, by
transmitting the Play and Stop commands from your
CD players remote controller, the RDC-7.1s remote
controller can be taught to transmit those commands
when its Play [ ] and Stop [ ] buttons are pressed in
CD mode.
This is convenient when you want to add commands to
buttons after entering a remote control code (See page
129).
Notes:
The following buttons cannot be taught new com-
mands: [LIGHT], [Custom], [Macro], [Mode],
[Input], [Zone 2], [Zone 3], and the scroll wheel but-
ton.
The RDC-7.1s remote controller can learn a total of
150 commands. However, the commands of some
remote controllers may use a lot of memory, in which
case, this total will be reduced.
If the message FULL appears, the remote control-
ler cannot learn any more commands because its
memory is full.
By default, the RDC-7.1s remote controller knows
the commands for controlling an IntegraRESEARCH/
Onkyo CD player, cassette deck, DVD player, and
MD recorder (e.g., Play, Stop, Pause, etc., buttons).
You can teach these buttons new commands, although
the defaults will be restored if the remote controller is
reset.
To teach a new command to a button that has already
been taught a command, simply repeat this proce-
dure.
Like most remote controllers, the RDC-7.1s remote
controller uses infrared. Commands from remote
controllers that dont use infrared cannot be learned.
When the remote controllers batteries expire, all
learned commands will be lost and will have to be
learned all over again, so dont discard your other
remote controllers.
Learning Commands from Another
Remote Controller
1
Press and hold the [Custom] but-
ton for more than three seconds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
LEARN, and then press the
scroll wheel.
3
Roll the scroll wheel to select the
the remote controller mode you
want to teach a new command,
and then press the scroll wheel.
4
On the RDC-7.1s remote control-
ler, press the button you want to
teach the new command.
If you press a button that cannot be
taught a new command, the message
RETRY appears and you should press
another button.
Custom
5
Point the remote controllers at
each other, about 2 to 6 inches (5
15 cm) apart, and then, on the
other remote controller, press the
button whose command you want
to learn.
When the command has been learned
successfully, OK appears on the dis-
play. You may need to press the button
several times.
If the command is not learned success-
fully, after the message FAIL has been
displayed, the mode select display reap-
pears (step 3), and you should try again.
6
To teach the RDC-7.1s remote
controller more new commands,
repeat steps 3 through 5.
Press the [Custom] button when youve
nished.
136

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo RDC-7.1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo RDC-7.1 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo RDC-7.1

Onkyo RDC-7.1 Gebruiksaanwijzing - Nederlands - 156 pagina's

Onkyo RDC-7.1 Gebruiksaanwijzing - Deutsch - 156 pagina's

Onkyo RDC-7.1 Gebruiksaanwijzing - Français - 156 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info