64966
58
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
58
Troubleshooting—Continued
The remote controller doesn’t work properly.
Make sure the batteries have been installed with the correct polarity (+/–) (see page 5).
Replace both batteries with new ones. (Do not mix different types of batteries or new and old batteries.)
The remote controller is too far away from the CD receiver, or there’s an obstacle between them (see page 11).
The CD receiver’s remote control sensor is being subjected to bright light (inverter-type fluorescent light or sunlight).
The CD receiver is located behind the glass doors of a audio rack or cabinet.
Interactive control with other Onkyo u-capable components is not working.
Make sure the u cables and analog audio cables are connected correctly (see pages 19 to 23). Connecting only an
u cable won’t work.
Make sure the Input Display matches the type of device that you’ve connected to the CD receiver (see page 28).
When recording an MP3 CD to an Onkyo recording component, recording will start without performing a peak search
when the [CD DUBBING] button is pressed on the recording component. This is not a malfunction.
No sound is heard from a connected component.
Make sure the optical digital audio cable is not bent or damaged. (CR-725DAB)
On the external component, set the digital output format to PCM, as the CD receiver supports only PCM signals. (CR-
725DAB)
Make sure the correct input source is selected (see page 26).
Make sure the analog audio cable is connected correctly (see pages 19 to 24).
Make sure that all audio connecting plugs are pushed in all the way (see page 18).
No sound is heard from your turntable.
Make sure the turntable has a built-in phono equalizer.
If the turntable doesn’t have a phono equalizer built-in, you must provide one.
Timer playback or recording doesn’t work.
Make sure the clock has been set correctly (see pages 49, 50).
Timed operation will fail if the CD receiver is on at the specified On time, so make sure it’s set to Standby (see
page 53).
The timer may overlap with another timer. If you program several timers, make sure they don’t overlap (see page 51).
If you press the [SLEEP] or [TIMER] button while a timed operation is in progress, the timer will be cancelled.
Make sure the u cables and analog audio cables are connected correctly (see pages 19 to 23).
If you’re using an Onkyo component for timed playback or recording, you must set the Input Display to match that
component (see page 28).
The time is not displayed in Standby mode.
Set the CD receiver so that the time is displayed in Standby mode (see page 50).
Remote Controller
External Components
Timers
Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit’s
malfunction. Before you record important data, make sure that the material will be recorded correctly.
The CD receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe
interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this
should happen, unplug the power cord, wait at least 5 seconds, and then plug it again.
58

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo CS-725 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo CS-725 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo CS-725

Onkyo CS-725 Gebruiksaanwijzing - Nederlands - 176 pagina's

Onkyo CS-725 Gebruiksaanwijzing - Deutsch, Français - 176 pagina's

Onkyo CS-725 Gebruiksaanwijzing - Italiano, Espanôl - 176 pagina's

Onkyo CS-725 Gebruiksaanwijzing - Svenska - 176 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info