569206
69
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
Page 69
OLYMPIA CM 1856F _______________________Programming Instruction___________________________________
Activate SPRINTER wireless module
Connection to the power supply
Before you connect the SPRINTER system to the power supply, the cash register and the printer should
both be turned on. Plug the adapter into the powersocket. Then connect the adapter with the power
supply connection on the module.
A self-test starts automatically. The green LED and the red LED blink once. If no errors are
found, the green LED lights up and the other LEDs are off. The system is now ready for use! If
an error occurs, all LEDs blink on and off and you hear a long beeping sound. Disconnect the
module from the electricity supply and then reconnect it with the electricity supply. If the error
is still present, contact a specialized dealer, if the error is no longer present, you can carry on
with the registration process.
Registering the POS module
In order to guarantee the correct operation, all POS modules have to be registered with every KP module
before they can be used. Every POS module has its own and unalterable ID, which is appointed at the
factory. This ID must be registered at the KP modules, as here described. All POS modules should be
registered singly and one after the other.
Before beginning the registration, all POS and KP modules should be ready for use (e.g. not in the
process of printing).
i) Set all third DIP switches on all KP modules to “ON” in order to get into the register mode. All
LEDs on the KP module blink on and off and you hear 2 beeping sounds. At the same time the
printer ID and the current registration list is printed out on the printer.
ii) Hold down the button “LEARN” on the POS module until you hear 2
beeping sounds.
iii) After releasing the button, the POS module is in registration mode. All
LEDs blink on and off.
iv) The ID of the POS module is sent automatically to all KP modules. If the registration with a KP
module was successful, then the corresponding LED lights up. When the registration process is
finished (after approx. 10 seconds), you hear 2 beeping sounds.
v) If the registration does not complete successfully, repeat the steps described.
vi) To return to the registration mode, press the “LEARN” button again.
The green LED lights up and all the red LEDs are out.
vii) Repeat the steps (iii) to (vi) for each module to register further POS Modules with the KP module.
viii) When all the POS modules have been registered with the KP module, set the third DIP switch on
the KP module back to the “OFF“ position in order to return to operation mode. As a control, the
printer ID and the updated registration lists are printed out on the printer.
Detailed settings are described in the instructions for the SPRINTER module.
LEARN
69

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Olympia CM 1856 F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Olympia CM 1856 F in de taal/talen: Engels als bijlage per email.

De handleiding is 0,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Olympia CM 1856 F

Olympia CM 1856 F Gebruiksaanwijzing - Deutsch - 67 pagina's

Olympia CM 1856 F Gebruiksaanwijzing - Deutsch - 39 pagina's

Olympia CM 1856 F Gebruiksaanwijzing - English - 41 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info