English
iii
Safety Precautions
This product has been carefully designed to give you years of safe, reliable
performance. As with all electrical equipment, however, there are a few
basic precautions you should take to avoid hurting yourself or damaging
the product:
1. Read the instructions in this manual carefully. Be sure to save it for
future reference.
2. The machine must be installed on a level surface. Away from direct
sunlight, air conditioners, damp or dusty environments.
3. Always unplug the machine from the wall outlet before cleaning.
Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.
4. The machine should never be placed near or over a radiator or other-
heat source. Nor should it be placed in an enclosed installation,
unless proper ventilation is provided.
5. Do not block or cover any openings on the machine, these are pro-
vided for ventilation.
6. Do not insert anything into the ventilation slots, doing so could cause
an electric shock, short circuit or a fire.
7. Ensure that no objects are placed on top of the machine and that it is
not opened during operation.
8. Remove all paper clips and staples to prevent damage to the scanning
equipment.
9. Do not plug the machine into a socket that is shared with a machine
producing electrical noise, e.g. air conditioning unit, and ensure that
the machine is earthed properly to avoid electric shocks.
10. The machine must be installed near to a power outlet source indi-
cated on the label ofthe AC adaptor. The power switch must remain
easily accessible at all times.
11. To avoid damaging the power cable, do not put anything on it or
place it where it will be walked on. If the cable becomes damaged or
frayed, replace it immediately.
12. Do not try to dismantle the machine, opening and removing the cov-
ers marked “Do Not Remove” may expose you to dangerous volt-
ages. Refer all servicing on those compartments to service personnel.
