97610
32
Verklein
Vergroot
Pagina terug
1/73
Pagina verder
B2520 / B2540
- 27 -
6 - Parameters/Setup
Printing the functions guide
51 - PRINT / FUNCTIONS LIST
1 Press on
and enter 51 with the digital keypad.
The printing of the functions guide starts.
74 - Erase mailbox
When the fax machine receives an
e-mail with an attachment and
cannot open it, it erases the
message from the ISP MBX, prints
and transmits with a notice of
uncomprehension to the message
sender.
At E-mail reception, the fax does
not destroy the MBX message, it
prints a notice of uncomprehension
asking you to recuperate this
message with your computer
equipment.
This parameter is useful only if you
have PC equipment. The memory
capacity is limited, you need to
empty your MBX or else new
messages may not be received.
75 - Text Attchmt.
Editing YES / NO and printing the
received Internet documents.
76 -
Attchmt format Default format of document sent on
the Internet:
PDF : monochrome or colour
IMAGE : monochrome (TIFF) or
colour (JPEG)
77 - LAN speed
To define the communication
speed of the peripheral units in
relation to the implemented Local
Area Network (LAN).
80 - Toner save
Makes printing lighter to save toner
cartridge ink.
81Font number
Starts the printing of the log list.
This parameter lets you set the
default PCL font. The possible
values are included between 5 and
128 inclus. The default value is 0
(Courier).
82 Form lines
This parameter lets you set the
number of lines per page.
This variable is linked to the PJL
variables: PAPER and
ORIENTATION. If you modify one
of these variables, the Form Lines
variable is automatically updated
(only for the print job in progress) to
respect the same spacing.
The possible values are included
between 5 and 128 inclus. The
default value is 60.
83 Font pitch
This parameter lets you set the
default font spacing, in characters
per inch (the default font must be of
type non-proportional).
The possible values are included
between 0,44 and 99,99 inclus.
The default value is 10,00.
Parameter Signification
84 Ptsize
This parameter lets you set the
default font height, in points (the
default font must be of type
proportional).
The possible values are included
between 4,00 and 999,75 (by step
of 0,25). The default value is 12,00.
85 Line termin.
This parameter lets you define line
breaks conversion: <CR>, <LF>
and <FF>.
The possible values are included
between 0 and 3. The default value
is 0.
86 Orientation
This parameter lets you set the
page orientation: portrait or
landscape. The default value is
"portrait".
90 - RAW Port
RAW network print port connection.
91 - Printer error
timeout
Time-out before document being
printed is deleted following a print
error in PC print mode.
92 - Printer wait
timeout
Wait time-out for data from PC
before the task is deleted in PC
print.
93 - Replace format
Page format change. This
parameter allows you to print a
LETTER format document on A4
pages using the LETTER/A4
setting.
94 - Printer class
Printing in PCL-/Postscript Mode
Printing in GDI mode
95 Symbol set
This parameter lets you set the
default character set. The possible
values are included between CS1
and CS30 inclus. The default value
is CS1 (Roman8).
96 - NBR. WEP
Keys
Number of WEP keys allowed
(from 1 to 4).
The printing is not possible on A5 paper
format.
Parameter Signification
32

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Oki-B2520-MFP

Zoeken resetten

  • er komt op mijn scherm "printerfout temperat. fixeer" wat moet ik doen om het weg te krijgen want ik kan niet meer printen en geen copy's meer maken . ik kan wel faxen. Gesteld op 4-10-2011 om 18:00

    Reageer op deze vraag Misbruik melden
    • Hallo, heeft iemand een antwoord op deze vraag? Bij voorbaat dank
      Marc Van Haver

      [email protected] Geantwoord op 24-10-2011 om 18:58

      Waardeer dit antwoord (1) Misbruik melden
    • just heard back from OKI and the answer is... press down arrow, then * then # this will give you sosi
      and sos2 , press okay, you will get eight bit binary, change left bit from 0 to 1 then ok, press red stop
      button. Now press down arrow, then # and finally the T button. Power down the printer then power
      on. Go back in and change the first bit back to 0 and you should have your printer back!
      is mij gelukt met dit
      mvg
      Erwin Geantwoord op 6-11-2012 om 21:05

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oki B2520 MFP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oki B2520 MFP in de taal/talen: Engels als bijlage per email.

De handleiding is 4,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Oki B2520 MFP

Oki B2520 MFP Gebruiksaanwijzing - Nederlands - 78 pagina's

Oki B2520 MFP Gebruiksaanwijzing - Deutsch - 82 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info