Instructions for use and assembly LIB040R04 Edition: 05-2005
Chapter 4/5 Child’s bicycle seat OKBABY ERGON Page 62 Chapter 6 Child’s bicycle seat OKBABY ERGON Page 63
Instructions for use and assembly LIB040R04 Edition: 05-2005
4 Product description
The seat is suitable for cycles with 26”/28” wheels and frames with a round section
diameter of 28-40 mm.
It cannot be mounted on frames of a different diameter.
It cannot be mounted if the carrier is wider than 15 centimetres. In this case,
dismount and replace the carrier with a narrower model before mounting the seat.
Contact the manufacturer if you are not sure whether the seat is suitable for your
bicycle.
5 Signs and symbols
Chapter 6 describes the assembly and chapter 7 the fundamental use of the bicycle
seat.
Read these chapters carefully to understand and put the possibilities and functions
into practice.
The following terms and symbols are used:
Symbol Term Meaning
DANGER Warning of possible serious or fatal
injury to people
WARNING Warning of possible slight injury to people
or damage to things
ATTENTION Warning of possible defects and/or destruction
of the product
IMPORTANT/NOTE An important or useful note is provided
WARNING! Follow the safety
warnings (see Chapter 1) to avoid injury
or damage due to assembly mounting
errors!
Do not use the seat if it is damaged!
IMPORTANT/NOTE: The numbers in
brackets refer to chapter 3 “Product
overview”.
IMPORTANT/NOTE: Whilst fixing the seat
to the bicycle, take care not to damage or
trap any brake wires or wires of the
bicycle’s electrical system.
Illustration 1:
Fit the support bar (4) in the holes 17.
Illustration 2:
Position the fixing plate (11) in one of the
three positions, generally the central one.
ENGLISH
ENGLISH
11
6 Mounting and assembling the seat
4
17
4
17
