301431
25
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro 25
TOPCOM OGATECH OG-T700/Twin/Triple/Quattro
ENGLISH
7.1.1 Setting the base speaker volume
To change the volume during playback of incoming or outgoing messages, press to
increase or to decrease. The volume can be set from ‘0’-’9’. If the volume is set to the
lowest position there will be no audible output during call screening and during remote
interrogation, but there will be a level ‘1’ output for other operation.
7.1.2 Turning Answering Machine On/Off
If the answering machine is On, the -LED on the base will light up continuously (or blink
when there are new messages) and the machine will automatically pick up the line after a
number of rings ( See 7.1.3 “Setting Number of Rings” ).
If the answering machine is Off, the -LED on the base will not lit.
Press to switch On the answering machine.
A voice confirms the setting and playback the active OGM.
Press to switch Off the answering machine.
Even if the answering machine is Off, it will automatically pick up after 10 rings to enable
remote activation (See 7.3 “Remote Operation” )
7.1.3 Setting Number of Rings
The number of rings after which the answering machine will answer calls can be set from
2 – 9 and TS (Toll saver). The standard setting is 6 rings. In Toll saver mode, the machine
will answer after 6 rings if there are no new messages, and after 2 rings if there are new
messages. If there are no new messages and you call your machine to check your messages
remotely ( See 7.3 “Remote Operation” ), you can hang up after the 2nd ring. You do not
need to pay connection fees and you know that you do not have any new messages.
To check the actual number of rings, briefly press the ‘skip forward’ button. A voice will
playback the current number of rings.
Press for 2 secs to set the number of ringing tones.
Press immediately to change the current number of rings.
If you do not press any keys for 3 seconds, the machine will set the selected number of
rings.
7.1.4 Day and time setting
Press and hold the -key until the day is pronounced.
Press the or to change the day and press the -key to confirm and go to the hour
settings
Press the or to change the hours and press the -key to confirm and go to the
minutes settings
Press the or to change the minutes and press the -key to confirm
If the day and time are correctly entered, the unit will anounce the new setting.
If no outgoing message is recorded, a pre-recorded outgoing message will
be used.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ogatech og t700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ogatech og t700 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info