12
TDX5
In the event that any component of your regulator assembly requires any form of
repair or service, return it to your local Authorized Oceanic Dealer for profes-
sional service by a trained technician authorized to perform Oceanic factory
prescribed service.
Once each year your complete regulator assembly should be inspected and ser-
viced by an Authorized Oceanic Dealer. More frequent service is recom-
mended if you dive in severe conditions or more frequently than an average
diver (see guidelines on page 13).
Annual Service consists of:
• Inspection
• Complete disassembly
• Thorough cleaning and evaluation of reusable parts
• Replacement of non-reusable parts
• Complete reassembly
• Final adjustment and testing
Costs for routine inspection and Annual Service are understood to be a normal
part of operation, and are not covered by the regulator's limited warranty.
If Warranty Service is requested, or routine service parts are requested in
accordance with a Registered Service Agreement, present the appropri-
ate documents (i.e., card, receipts, and service records) to the Authorized Oce-
anic Dealer when the regulator is delivered for service.
ADDITIONAL SPECIFICATIONS
FOR CONNECTING COMPONENTS TO
OCEANIC REGULATOR FIRST STAGES
Second Stage (Primary or Octopus):
• Nominal Source Pressure = 140 psi (9.5 BAR) ± 5 psi (.5 BAR)
• Maximum Source Pressure = 155 psi (11 BAR)
• Thread Size = 3/8 - 24 UNF
• Inhalation Effort = 1.1 to 1.3 ciw* (cubic inches of water)
* Delta 3 model = adjustable from 0.0 to 2.5 ciw
• Exhalation Effort = 1.1 ciw*
• Flow Rate = 30+ scfm (standard cubic feet per minute)
• Work of Breathing is equal to or better than USNavy and CEN
Pressure Gauge or Pressure Transmitter:
• Maximum Source Pressure = 5000 psi (350 BAR)
• Thread Size = 7/16 - 20 UNF
