47336
105
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
Using COMMAND CENTER
ADVANCED OPERATION GUIDE 8-19
Advanced > Protocols > TCP/IP > IP Filters
IP filters specify a host or network of hosts that are allowed to access the printing
system. An entry should be a network number or host IP address. Up to 10 access
list entries are allowed.
When there are no entries, access is allowed to all hosts.
To allow all hosts on network 192, enter 192.0.0.0 and 255.0.0.0.
To allow one host 192.168.1.2, enter 192.168.1.2. The default mask
255.255.255.255 is assumed and subnet mask can be left blank.
Advanced > Protocols > TCP/IP > Logical Printers
Logical Printers allows you to use this machine as four virtual printers.
Each logical printer can be used with either FTP, LPR, or IPP protocols. All printout
to a non-existent port will be accomplished to Logical Printer1.
Item Description
TCP/IP Port Number Specifies the IP address for the logical printer as well as the TCP raw port
number (9100, etc.). Conversion is applied to data that is input to the specified
raw port in accordance with the designated logical printer. This port is invalid if it
is given a port number that is the same as that of an already specified port (e.g.
FTP or LPD).
Bi-directional Printing Enables or disables bi-directional printing using the TCP/IP raw port. If you turn
this setting Off, all data received from the printer will be ignored.
In order to have the data that is received from the printer returned to the client
when printing with PostScript, PJL and other such commands, it is necessary to
enable bi-directional printing.
Start of Job Strings Specifies the character string sent to the printer before output directly to the
output port (lp port). Specifies the character string if it is necessary to transmit the
control code before printing.
End of Job Strings Specifies the character string sent to the printer after directly outputting to the
output port (lp port). Specify a character string, if it is necessary, to send a control
code after printing.
105

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oce OP1018 Advanced Operation Guide bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oce OP1018 Advanced Operation Guide in de taal/talen: Engels als bijlage per email.

De handleiding is 2,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info