554519
3
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
M
onitoring of energy consumption
T
he thermostat calculates average time it has been switched on allowing you to monitor your energy consumption.
In the thermostat you can read out:. Total switch-on time in percentage in the latest 2 days, 30 days or 365 days.
Calculation of operational costs per day: (switch-on time:100) x kW x kWh-price x 24 h per day
E
xample: Read-out: 30 % in the latest 365 days
S
ize of heating system: 1,2 kW (ask the installer)
Cost of power: 0,2 EUR / kWh
C
alculation: (30:100) x 1,2 kW x 0,2 EUR / kWh x 24 h = 1,7 EUR per day
4
. Advanced settings and read-out
4-event sequence
The present event sequence flashes: Days 1-5, followed by days 6-7. To change, press the UP ( ) button until you have days 1-6
a
nd then day 7 flashing, or all 7 days are flashing. Select the required sequence with the OK ( ) button.
5-2: 4 events in 5 days +
2 events in 2 days.
6
-1: 4 events in 6 days +
2
events in 1 day
7-0: 4 events in 7 days
2
days
30 days
3
65 days
Software version
Actual sensor temperature
Max and min allowed temperature range
The temperature setting range of +5˚ to 40˚ C can be limited to prevent at comfort or manual mode a too high or too low temperature
being selected. For example, a wood floor covering should not be allowed to exceed a maximum of 27˚C. Low limitation is used where
the temperature of the floor is required never to fall below the minimum set temperature.
Time and temperature scale selection
Adaptive function
This function enables the thermostat to calculate when it needs to switch ON so that the required temperature is reached at the set
time. With a start time of 07:00 therefore, the thermostat may switch ON as early as 06:00 so that the desired temperature of 25˚C is
achieved by 07:00. Without this function set, the thermostat will start to heat at the time you set.
Maximum allowed temperature setting. Use the UP ( ) or
DOWN ( ) button to increase or reduce, and OK ( ) button to
accept.
Next is displayed LoLi. Press OK ( ) button to continue.
Minimum allowed temperature setting. Use the UP ( ) or
DOWN ( ) button to increase or reduce and OK ( ) button to
accept.
You can select either ˚C or ˚F scale, and 12 or 24 hour clock as
follows:
Press UP ( ) or DOWN ( ) button to change settings. Confirm
the required scale with the OK button ( ) button.
}
Press the DOWN ( ) button to switch between on and off.
Press OK ( ) button to confirm.
Press OK ( ) button to end programming and to return to
scheduled programme.
P
ress both UP ( ) and DOWN ( ) buttons together for 3 seconds. INFO is displayed.
P
ress UP( ) button until you reach the desired sub menu. Select the sub menu with the OK ( ) button.
P
ress UP ( ) or DOWN ( ) button to show the different
r
eadouts.
No changes can be made here. Use the OK ( ) button to end.
© 2009 OJ Electronics A/S · ® The OJ trademark is a registred trademark belonging to OJ Electronics A/S
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

OJ-ELECTRONICS-OCC2

Zoeken resetten

  • Beste lezer,
    Mijn thermostaat de OCC 2 is normaal verlicht. Geeft geen storing aan..
    Kan het zijn dat ergens een zekering in dit apparaat zit??
    Of moet ik de mat doormeten of evt. de voeler??
    Kunt mij op weg helpen.
    Ik hoor het graag.
    Mijn email henkbennica@gmail.com
    Alvast bedankt Gesteld op 9-12-2018 om 21:05

    Reageer op deze vraag Misbruik melden
    • Ik zou het niet weten.
      Die van mij ligt al 1,5 jaar open in de garage.
      Dit i.v.m. een hernia.
      Ik zou ook graag de Ohms willen meten om de vloer mat en de voeler te meten?
      Ik weet niet hoeveel volt de vloermat moet hebben? of ik er gewoon 220volt op kan zetten.
      Mocht u deze gegevens hebben dan zou ik ze ook wel willen hebben.

      m. vr. grt.
      Roberth Geantwoord op 11-12-2018 om 14:13

      Waardeer dit antwoord (3) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw OJ ELECTRONICS OCC2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van OJ ELECTRONICS OCC2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van OJ ELECTRONICS OCC2

OJ ELECTRONICS OCC2 Gebruiksaanwijzing - Nederlands - 4 pagina's

OJ ELECTRONICS OCC2 Gebruiksaanwijzing - Deutsch - 4 pagina's

OJ ELECTRONICS OCC2 Gebruiksaanwijzing - Français, Dansk - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info