618139
4
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
4
8. Cue Button – If no cue point is set, pressing the button will force a restart from the beginning of the track.
Press the “CUE SET” button to set a new cue point and the “CUE” button will illuminate. Press “CUE” to play
from this new cue point.
9. Cue Set – Sets the cue point during playback or when paused.
10. Hot Cue 1, 2, 3 – Sets a Hot Cue during playback or while paused. These are similar to regular cue points,
except that when the buttons are pressed, the unit will instantly jump to the defined point and begin playing.
When the button is pressed again, playback will resume from the set Hot Cue. When Shift + Hot Cue are
pressed, the Hot Cue will be deleted. Button will illuminate when a cue point has been set.
11. Jog Wheel – Capacitive Touch-sensitive jog wheel manipulates the audio when the wheel is touched and then
moved. The mode applied will decide the effect that the jog wheel has. When in “Scratch” mode is engaged,
the wheel will allow users to grab and move audio slowly during play. When in “Search” Mode touching an
moving the wheel will force rapid movment throught the song. The non-touch-sensitive outer wheel will act as
pitch bend when a song is playing.
12. Scratch/Search – Controls the behavior of the platters. When not active, the platter will function as Pitch Bend.
When active, the platter will have the ability to scratch. Pressing Shift+Scratch/Search will enter SEARCH
mode.
13. Pitch Fader – Controls the tempo (speed) of the individual decks.
14. Pitch Down – Momentarily reduces the speed of the track when pressed and held.
15. Pitch Up – Momentarily increases the speed of the track when pressed and held.
16. Sync – Controls the behavior of the BPM sync of boths decks. When engaged, the selected deck will
automatically adjust the tempo/speed of the track to the same BPM that is set on the other deck. To manually
adjust the BPM and exit Sync mode, move the pitch fader for
the deck.
17. Loop in – This will set the beginning of a loop when in manual
looping mode. When Shift + Loop in are pressed, Algoriddim
djay will perform a 1/2-beat loop roll.
18. Loop Out – This will set the end of a loop when in manual
looping mode. When Shift + Loop Out are pressed, Algoriddim
djay will perform a 1-beat loop roll.
19. Reloop – This will re-engage the previously exited loop. When
Shift + Reloop are pressed, Algoriddim djay will perform a 2-
beat loop roll.
20. Auto Loop – Places a loop based on the autoloop length. When Shift + AUTO LOOP are pressed, Algoriddim
djay will perform a 1/16-beat loop roll.
21. Loop x1/2 – If a loop is playing, reduces the current loop length by half. If a loop is not playing, the will set the
Autoloop loop length. When Shift + Loop x1/2 are pressed, Algoriddim djay will perform a 1/8-beat loop roll.
22. Loop x2 – If a loop is playing, multiplies the current loop length by 2. If a loop is not playing, the will set the
Autoloop loop length.. When Shift + Loop x2 are pressed, Algoriddim djay will perform a 1/4-beat loop roll.
23. FX Parameter – Controls the parameter of the selected FX.
24. FX On/Off – Engages and disengages the selected FX.
Note: You can run up to 2 effects at a time if using either iPad 2 or iPad (3rd generation).
25. Filter – Controls the amount of the filter on the assigned channel.
26. Channel Volume – Adjusts the volume of the individual channels.
27. Crossfader – Controls the mix blend between the two decks.
28. High EQ – Controls the treble frequencies for the individual channels.
29. Mid EQControls the mid range frequencies for the individual channels.
30. Low EQ – Controls the bass frequencies for the individual channels.
31. Master Volume – Adjusts the Master volume of the balanced XLR outputs and RCA outputs. (Note: When
using AirPlay or Bluetooth, adjust the master volume in djay’s Settings menu.)
32. PFL – Engages Cue Monitor for the selected channel.
33. Record – Starts recording of the performance in the software.
Note: Loop rolls are momentary
commands which occur when the
associated combination keys are being
held. The deck’s audio source still plays
in time while the loop roll occurs and
will be heard again when the loop roll is
released.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Numark iDJ Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Numark iDJ Pro in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 5,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info